GALLO-DSG common electric lifting pole is an electric lifting device which can provide a high antenna for the truck. It can automatically lift the top load to the specified height to ensure that the top load works steadily and safely in the air.
The electric lifting rod adopts high efficiency and reliable screw drive as power source. The lifting motion is stable, free, no impact and jitter, and has reliable locking function. After lifting, the electric lifting rod can lock in any height and direction and keep reliable operation.
The electric lifting rod can be lifted automatically. When the automatic lifting function fails or power is cut off, it can be lifted manually. The manual operation is efficient and portable.
The electric lifting rod adopts dual power system, and the lifting and lowering actions are driven by power, which ensures that the lifting rod system can safely lift in harsh environment.
Electric lifting rod has strong environmental adaptability. The lifting rod can work in plain, hilly land, mountain, plateau, coast and other environments. Rubber seals are used between the multi-section rods, which have excellent waterproof, ice-proof and sand-proof performance. The inner and outer surfaces of the rod body are specially treated and have excellent anti-mould and salt fog properties. Class three defense performance.
The electric lifting rod is composed of four antenna poles, driving motor, transmission mechanism, wire rope linkage mechanism and control part.
The function of this product is to shorten the system preparation time, quickly erect antenna, and meet the system's maneuverability requirements. It has the following functions:
(a) Manual or electric lifting;
B) Stop working in any state;
C) Self-locking in any position.
A) Total height at elevation: 6m & plusmn; 100mm;
B) Total height at closure: 1.82 M & plusmn; 10 mm;
C) Vertical load-carrying capacity: 50kg (eccentricity less than 50mm) (including the weight of cable, mounting bracket and all mounting equipment);
D) Top wind load carrying capacity (under steady wind speed): 10 kg (height from the top less than 300 mm);
E) Electric lifting speed (one way): 4 minutes;
F) Working mode: electric or manual;
(g) Steady wind speed: Class 8 wind works normally;
H) Limit wind speed: 12 wind does not destroy;
I) the oscillation at steady wind speed: & plusmn; 120 mm;
J) Torsion angle: & plusmn; 0.5 & deg; (Torque less than 20Nm);
K) rod weight: 55kg;
1) The device does not need to start work frequently.
(a) Electrical interface requirements:
Input power: 220V, 50Hz AC;
Input power: 500W (motor power: 180W);
B) Mechanical interface requirements:
The installation interface of the top flange is shown in Fig. 1, and the outline size and installation interface are shown in Fig. 2.
The bottom of the electric lifting rod is provided with a water outlet. When the lifting rod is installed, a certain space should be left here so that the accumulated water in the rod can be discharged smoothly (as shown in Figure 2).
In summary, the system can meet the needs of electric and manual lifting of antenna pole. The pole body is rigid and strong. It does not need to be tied by wire rope when working, which greatly reduces the requirement of using position for lifting pole. It has good reliability and small swing and torsion of pole body. It can meet different requirements.