Home>Equipment list>Fire/emergency rescue equipment>Plugging equipment>Folding Water Storage Wall for Flood Control and Emergency Relief Material
细节展示放大镜特效

Folding Water Storage Wall for Flood Control and Emergency Relief Material

  • No:Mobile folding water wall
  • Quantity:

      Recommend

    Hunan speeds up flood control and emergency materials reserve folding water storage wall


    According to Xinhua News, different natural disasters, such as large or small floods and droughts, occur everywhere every year. So what work should we deploy in advance before the floods come?

    Reporters learned from the flood control and drought relief headquarters that flood control and drought relief materials (flood control wall) are often used in the early stage of flood control. Flood control wall plays an important role in emergency rescue and personnel mobilization in flood control deployment. Next, I will introduce the use method of convenient water shutoff wall for flood control.

    Injection into the gasoline tank90#The above clean gasoline is injected into the oil tank.(0.6ml) [Note: New Machine Use8The oil needs to be replaced after an hour. Until there is an oil outflow at the filling port.

    To inject water into the water injection port of the pump, this method can be changed into putting the intake pipe into the water, holding both ends after filling, connecting the joint directly to the pump body, lifting one end and putting it into the water, so that the water will automatically enter the pump.

    After the above operation is in place, the starting pull rope can be pulled: the starting can be carried out.

    Stopping and Storage of Machines The shutdown of the machine is just the opposite of the start-up. It should be noted that the gasoline in the carburetor must be exhausted, otherwise, the machine will not easily ignite for a long time. The method is simple: switch the gasoline on and off."Left" pull, you can let the machine automatically extinguish, when the carburetor inside the gasoline has burned out. Then turn the pump drain plug open and let off the excess water in the pump.

    Storage of water wall after use After using the water shutoff wall, turn on the water release switch to release the water.2At one end, the dam is lifted and raised slowly until the water inside is released and the dam is moved to a clean and clean place to be cleaned and dried repeatedly before being loaded back. Store in a dry and ventilated environment.