Flood Control Pipeline Blocker Price of Flood Control Pipeline Blocker Picture of Flood Control Pipeline Blocker
This equipment is mainly used in micro-piping gap. The advantage of this machine is to inject into the small-piping gap with the high-pressure structure of reciprocating cascade surge.WX-TV6015Special water body piping liquid, water body piping liquid into the piping micro-gap will quickly enter all kinds of fissures bifurcation gap, see water after the water body piping liquid will be rapid.5~10The expansion reaction can be doubled to achieve the function of auto-pressurization. From then on, filling and solidifying micro-cracks can achieve the purpose of rapid control of piping.
Advantages: Large piping depth piping, high flow rate, fast pressure, etc., can be added into the piping powder.WX-32DSpecial Piping Expansion Sand,Rapid expansion and solidification of piping slurry after rapid injection
Advantages: Suitable for irregular gap size, large or small piping, piping on the top or both sides of the dam, with eyes can see piping leakage point, suitable for use of this machine, high pressure injection of piping paste special for this machine into the piping can quickly stop obvious piping.
Slurry piping plugging machine(Piping blocker)Grouting Structure Principle
Slurry piping plugging machine(Piping blocker)Grouting pump is composed of motor, reducer, hopper, turbocharged stator assembly, pressure measuring joint, grouting pipe and electrical system. When used for injection, it also includes ejector. Position of each part
1. The function of grouting pump is to promote cement mortar,Make it overcome pipeline resistance and reach
To the perfusion site.
II. Working Principle of Grouting Pump
Close control power switch, control circuit power, press the buttonSB2[Grouting]2KMMotion, the motor rotates in the direction of grouting;Motor-driven reducer and conveyorThe screw rotates to convey mortar from hopper to booster silo composed of booster worm and booster stator.
1Through step-by-step pressurization of the booster silo, cement mortar can reach the filling position through the grouting hose, thus completing the transportation and filling of cement mortar.
2This technology adopts the advanced worm pressurization method in Europe and Britain to obtain continuous impulse-free mortar flow and make the grouting pressure meet the design requirements.;At the same time, the transportation and filling of thick slurry are guaranteed. It achieves satisfactory effect of pouring thick slurry and realizing large flow rate.
When the filling slurry is finished, it needs to stop or keep pressure. Press the stop button to determine the holding time according to the actual situation. If pressure relief is required, press the "relief" button at this time.2KMActing, the motor rotates in the direction of [decompression], so that the booster silo composed of booster worm and booster stator can be decompressed in reverse. To achieve the purpose of pressure release. notes:Don't use [decompression] press for a long time.