Product introduction:
Continuous pump suction is used to detect the concentration of alcohol automatically. It can be used in large-scale preliminary screening of drunk driving and alcohol concentration without the active blowing of the tested person. The reading time is fast and it can be used in large-scale preliminary screening of drunk driving.
Product characteristics:
Integrating flashlight, baton and alcohol detection
It has the functions of voice prompt, warning lamp and motor vibration.
Automatically pumping and quick checking
High Precision Fuel Cell Sensor
Product applications:
Public security, traffic police law enforcement, etc.
Product parameters:
|
| BL-WFAT-101B |
| volume | 300*44mm(245gContaining batteries) |
| Measurement mode | Quick Checking and Automatic Detection |
| Pumping mode | Continuous pumping, continuous pumping at work. |
| measuring range | 0~400mg/100ml BAC |
| sensitivity | 0.5mg/100ml BAC |
| Display mode | 1.29inchOLEDColour display |
| Key | Flashlight control key, baton control key, alcohol detection key |
| measurement accuracy | Standard gas concentration50mg/100ml BACTime: Blowing distance less than5cmWhen: & plusmn;5.0mg/100ml Blowing distance5~10cmWhen: & plusmn;6.0mg/100ml Blowing distance greater than10cmWhen: & plusmn;10.0mg/100ml |
| Measuring time | 1~15Adjustable seconds |
| Power waste | Alcohol Timing50mA;When the baton and flashlight are all on <600mA |
| Use batteries | 18650Lithium batteries:4.35V/3000mAh,Continuous alcohol testing500Secondary and above |
| Using Sensors | 16mmFuel cell sensor |
| Flashlight function | High bright white light, high, low brightness and flash function can be switched arbitrarily |
| Command baton function | Warning red light, constant brightness, stroboscopic function can be switched at will |