I. Overview
Automatic rifle simulation terminal (hereinafter referred to as the launch end), the launch end can be mounted on the actual automatic rifle, by firing a laser, to simulate the automatic rifle and various types of battlefield targets of the fire battle process; This training system is simple in structure, easy to install, easy to use, high simulation design accuracy, stable and reliable work, can effectively strengthen the battlefield, tactical training, and no security risks, no logistics and medical packaging.
Second, the main war technical indicators
1, the effective distance of the laser: 200m
2, spot size: 30cm
3, receiver receiving angle: horizontal 360 - deg;
4, display mode: sound, light, smoke
5, power supply mode: supporting universal rechargeable battery, single charge, the use time is 5 hours
6, day and night can be normal use;
7, patented design gold-plated tail vertebrae, wear and corrosion resistance, gunpowder residue, high strength, good toughness, frequent use does not affect accuracy;
8. Product operating temperature range -40 to 50 -deg;C, winter and summer can be used normally, resistant to harsh environment.
Composition and function
The automatic rifle simulation terminal consists of a helmet terminal, a carrying terminal and a laser transmitter.
1, helmet terminal is used to strike the laser reception, hit smoke sound and light display, as well as the state of the display. The helmet terminal includes the following components: helmet, master box, probe, and hit display, see figure below. Hit display is displayed in a high-brightness light tube. After installing the canister, smoke is emitted when the smoke is emitted.
2, carrying the terminal by the control box and receiver, tactical vest three parts;
The receiver is used to receive the receiving of the strike laser.
Probes are used for signal processing.
3, the laser transmitter by the laser transmitter, clip control box, trigger switch composition.
4, control center: computer software and transmission equipment composition can be real-time observation of the movement of the two players;
Installation and commissioning
The system is designed for the feedback of the troops, and the laser emission is triggered by a special trigger sensor, and the buzzer is ringing.
1. Tie the helmet tie to the helmet lining part. Turn counterclockwise to develop the cover of the cigarette holder, place the smoke canister on the cigarette seat, and the trigger copper wire on the smoke tank comes into contact with the metal on the circuit board. Tighten the cover of the cigarette holder.
Note: The smoke canister snephers slightly before use to trigger the copper wire to remove the insulation.
2, install the laser transmitter
First install the clip control box, the simulation clip is placed in the normal clip mounting position.
Install a laser transmitter, hold the laser transmitter head in hand, and rotate evenly and force the tail vertebrae into the barrel.
Trigger installation: Trigger switch mounting and gun butt site, near the butt of the gun has a small round hole, when pulling the trigger there is a movement reed inside. The trigger switch is designed primarily on this principle.
Align the cylinder on the trigger switch at the small round hole, push flat slightly, and tighten the fixing nuts on both sides.
3, wear a tactical vest, control box located in the back.
4, turn on the power supply: first open the terminal control box power supply, then open the helmet control box power supply, and finally open the clip control box switch. The system will ring automatically when opened, and the self-test system is OK.
5, after the hit smoke canister smoke, buzzer sound.
6, after the use of the projectile, the buzzer inside the magazine will ring, indicating that the amount of the bomb is complete, must be reloaded.
Note:
1, laser is harmful to the human eye, do not look directly at the laser, to avoid light directly into the eye;
2, smoke cans have a certain risk, do not personnel close to the smoke canister spit.