1 Mobile Rotary Target
The motion rotary target machine, for the mobile motion rotary target machine, is mainly used for the training of the shooting class of the army application class. Wireless remote control enables stand-alone, grouping and group control. The speed of motion, the hidden time, the number of hidden appearances, the number of round trips can be set. AC-DC dual power supply mode, AC 220V. Post on POST, status display, fault indicator alarm.
2.Function parameters
2.1 Target vehicle main body of 1200 x 500 x 400mm (long, wide, high), the height of the added target plate is not less than 1.7 meters.
2.2 track length of 60m, for the combination of portable track, can be assembled into a straight line, S curve type, easy to install.
2.3 Rotation time: rotation 90 degrees, hidden time of 1 second / time, hidden interval can be set according to the need.
2.4 Carrying weight: Carrying weight: 10kg.
2.5 Motion speed: the target car movement speed is 3m/s, the speed of motion can be adjusted at will.
2.6 Control distance: In the case of universal vision, the effective control distance between the remote control and the target machine is 500m.
2.7 Operating frequency point: working frequency point s 10, effectively avoid communication interference.
2.8 Continuous operating hours: In battery-powered cases, the number of round trips after standby 8h is 80 times.
3. Environmental adaptability:
3.1 temperature: operating temperature: in the environment of -30 C to 50 oC, the power-on can work properly.
3.2 Humidity: In the relative humidity 30% to 98% environment, the start-up can work properly.
3.3 wind resistance: six wind (including) below (wind speed is not greater than 13.8m/s), to ensure that the target plate is stable, can be used normally.
3.4 anti-corrosion: the surface using electroplating, spray molding, painting and other ways to protect against rust treatment, coating thickness of 60 m. The base is treated with corrosion protection and rust.
4. Reliability:
4.1 Average Trouble-Free Time (MTBF): MTBF s 100h. Continuous operation of 30 cycles, normal operation of the moving parts run smoothly, no obvious stagnant, abnormal sound.
4.2 Average repair time (MTTR): MTTR s 0.5h.