1Firearms loaded with rebound, residual bullets, and firearms fired bullets can be safely collected in the ammunition collector.
2. The angle can be adjusted according to the height of the person and the length of the gun.
3. Provide certificates of product quality inspection issued by enterprises.
Instructions for the Use of Receivers
The barrel core of the catapult is made of high density bullet-proof material and is used in combination with high strength rubber.
Product assembly:
The main body and the bottom support of the product are separated during transportation. After receiving the goods, the bottom support rod is connected with two connecting rods on the main body and fixed with bolts. The middle part of the bottom support is provided with a support rod, and the other end is connected with the main body, which is fixed by an opening pin.
2. Product function:
The product supports 45-55 & deg; angle adjustment. This product can collect bullets of rotary pistol, 54 pistol, 92 pistol, 79 or 85 light submachine gun, 95 type 5.8mm automatic rifle and 81 type 7.62mm automatic rifle.
3. Product specifications:
Total mass less than 50 kg/set
Before the bullet-proof device is used, make sure that the main body is loaded with fine sand, usually 300-500 mm high, and then put 20 mm thick rubber pad in the packing box into the bomb receiver for use.
5. Notes:
The rubber pad in the bullet-proof device must be replaced after 3 to 5 rounds of live ammunition firing.
