The main body of the ammunition collector is composed of high strength seamless steel pipe and support.
1、 Product assembly:
The main body and the bottom support of the product are separated during transportation. After receiving the goods, the bottom support rod is connected with two connecting rods on the main body and fixed with bolts. The middle part of the bottom support is provided with a support rod, and the other end is connected with the main body, which is fixed by a screw.
2、 Product function:
The product supports 45-50 & deg; angle adjustment. The products can collect bullets of revolver, 54 pistol, 92 pistol, 79 or 85 light submachine gun, 95 type 5.8mm automatic rifle and 81 type 7.62mm automatic rifle.
3、 Product Specification:
The total mass is less than 50kg/set, the main body size is more than 910*410mm, and the inner diameter of the main body ammunition collector is 100-plusmn; 2mm.
4、 Instructions:
Before using the catapult, make sure that the main body is loaded with fine sand, usually 300-400 mm high, and then put the rubber pad of 20 mm thick in the packing box into the catapult for use.
5、 Matters needing attention:
The rubber pad in the catapult must be replaced after firing 5 rounds of live ammunition.