Place of application
This YX-007mini-2 recording shield is a highly integrated high-tech personal safety protection product independently developed by Tianjin Yingxun Technology Co., Ltd. When the illegal elements use recording equipment (such as mobile phones, recording pens, recorders, etc.) to record you, the recording shield will generate random noise signals, which can produce suppressive interference on speech signals, so that only noise information can be picked up by recording equipment, but not voice information can be distinguished, so as to ensure speech. The security of sound information. Widely used: leaders, bosses, stars and other high-end personal needs.
。
| project | performance parameter |
| Types of shielding equipment | Mobile phones, digital recorders, recorders, all sound acquisition equipment |
| Shielding effect | Over 83% |
| Shielding radius | 120-180cm |
| Angle of action | Greater 90 degrees |
| Built-in battery capacity and operating voltage | 2000mah/12v |
| weight | 600 grams |
| Product size | 120*80*30mm |
power supply
This product adopts two power supply modes: power adapter and battery.
1. When the adapter is powered. The power adapter can be inserted directly into the power supply and charging port of Figure 2.
2. There are 2000 Mha batteries in this product, which can be supplied without power adapter.
Use
After getting this product, check the package first: one host; one power adapter
1. Turn on the power switch in Figure 2, the power indicator lights up, and the machine enters the working state.
2. Turn off the power switch in Figure 2 and turn off the machine.
Note: This product has built-in large capacity batteries that last more than 8 hours. It is recommended that if the batteries are electrified, try to work with batteries.
Product Charging:
The product is powered by 2000 MAH batteries. When the switch is turned on, the power indicator lights up and the product starts to work. When the power indicator lights are not on, the battery must be charged. When charging, insert the charger into the charging interface to start charging. During charging, the charger indicator is red and the charge can be stopped if the charge becomes green.
