Home>Equipment list>Law enforcement forensics equipment>Emergency Distribution and Control System
细节展示放大镜特效

Emergency Distribution and Control System

  • No:MV2025
  • Quantity:

      Recommend

    1、Speed Dome CamerasFront end of distribution control


    V Technical parameters:


    Power supply part

    Lithium battery box

    100Ah

    Lithium battery charger

    Special-purpose16.8VCharger

    Image receiving section

    frequency range

    328-352MHz/560-760MHz/

    1.2-1.5GHz/2-2.5 GHzOr customize according to customer requirements

    Radio Frequency Broadband

    6/7/8MHzor1.25/2.5MHz

    output power

    30dBm/IL=3

    Carrier-to-noise ratioC/N

    28Db@30 dBm

    Spurious emission

    -36 dBm(at carrier center frequency)fc±5MHzWithin the scope)

    modulation mode

    COFDM

    Video coding

    MPEG-2/MPEG-4

    Input Video System

    PAL/NTSC

    Rs232control interface

    standardRS232Level,96008N1

    Rs232data interface

    standardRS232Level, support1200-115200bps

    work environment

    working temperature

    -20~50

    Ambient humidity

    95

    Appearance characteristics

    Appearance size

    Diameter:135mm Height:375mm

    Equipment weight

    8.8kg

    V Functional characteristics:

    Fully enclosed design, high strength fuselage, built-in surge and lightning protection device for ball machine

    Non-line-of-sight(NLOS) Wireless image transmission and reception, wirelessPTZCommand remote control

    Instruction Control Protocol and Automatic Baud Rate Recognition

    Image adoptionAESEncrypted transmission, thermal imaging and free switching of visible mode

    Lithium battery and solar power supply

    Integrating thermal imaging night vision, high sensitivity camera and high precision platform

    Integrating heating and defogging devices inside the ball machine, the protection level can reach.IP67

    Convenient to carry and quick to install

    The central receiver can control the power status of transmitter and ball machine by wireless command.


    2. Night vision control front-end



    Technical parameters of V transmitter:

    Power supply part

    working voltage

    DC12~DC16.8V

    Working Current

    2.5A@DC12.5V

    Image receiving section

    frequency range

    1.2-1.5GHz/2-2.5 GHzOr customize according to customer requirements

    Radio Frequency Broadband

    6/7/8MHzor1.25/2.5MHz

    output power

    33dBm/IL=3

    Carrier-to-noise ratioC/N

    28Db@33dBm

    Spurious emission

    -36 dBm(at carrier center frequency)fc±5MHzWithin the scope)

    modulation mode

    COFDM

    Video coding

    MPEG-2/MPEG-4

    Input Video System

    PAL/NTSCBy defaultPALsystem

    Rs232control interface

    standardRS232Level,96008N1

    Rs232data interface

    standardRS232Level, support1200-115200bps

    work environment

    working temperature

    -20~55

    Ambient humidity

    95

    Appearance characteristics

    Appearance size

    220mm*145.5mm*55mm

    Equipment weight

    Transmitter: <1.57kg

    V Functional characteristics:


    Infrared thermal imaging technology, no red explosion, good concealment

    Working in all-black environment without any infrared illumination

    WirelessPTZCommand remote control

    Non-line-of-sight(NLOS) Transmission

    Frequency modulator shows working frequency and other parameters, user can adjust on site, intuitive and easy to use.

    The working frequency can be adjusted, that is to say, it can be set by itself within the frequency range.

    Transmitter adoptionAESEncryption technology, which can organize others to receive signals of the same frequency

    AdoptionCOFDMModulation technology andH.264Image compression technology to ensure stable signal transmission

    High quality audio and video signals

    Appearance Size: (Unit)mm

    V. Technical parameters of Yuntai:

    input voltage

    DC12~16.8V/1.5A

    Rotation angle

    level350& deg+20& deg; to-90(formal dress); top and bottom & plusmn;90(Side loading)

    speed

    level0.07& deg; to10°/Second; up and down.0.07& deg; to10°/second

    Limit adjustment

    External adjustment

    load

    15kgs(Formal wear)22kgs(Side loading)

    working temperature

    -20From centigrade to+55

    Shell structure

    Aluminium alloy

    size

    225mm*180mm*260mm(Formal wear)

    380mm*180mm*230mm(Side loading)

    weight

    10kg


    V camera technical parameters:


    Thermal imaging camera

    Working band

    8-14um

    Probe element

    320*240

    pixel size

    25um*25um

    focal length

    50mm

    focusing

    fixed

    aperture

    F1.0

    Field of View Angle

    9*7

    Detection range

    2000m(vehicle)850m(person)

    Recognition distance

    800m(vehicle)400m(person)

    image display

    White heat

    Colour Camera

    image sensor

    1/3/’’inch interline transfer CCD image sensor

    Effective Pixel

    PAL:752(H)*582(V);NTSC:768(H)*494(V)

    Tvl

    540TVL

    Signalling system

    PAL/NTSC

    white balance

    ATW,PWB

    focusing

    automatic/Manual

    Exposure control

    automatic/Manual

    SNR

    greater than50Db(AGC=0db,γ=1.0)

    Backlight compensation

    automatic

    Day&Night

    automatic

    Optical multiple

    20

    Number doubling

    12times

    focal length

    10-200mm

    aperture

    F1.8-C

    General parameters

    Video output

    Thermal Imaging Camera and Color Camera Video Manual/Automatic switching

    Video format

    PAL/NTSC

    control interface

    RS-485

    Address range

    0-255

    Power Supply

    DC12V

    working temperature

    -20-55

    This product is suitable for criminal investigation, drug control, court enforcement and so on. It is a good assistant for police officers to reduce their burden.