Home>Equipment list>Criminal science and technology>Trace inspection equipment>Ultraviolet Image Observation Photography System
细节展示放大镜特效

Ultraviolet Image Observation Photography System

  • No:HXZW-I
  • Quantity:

      Recommend

    HXZW-I Ultraviolet Image Observation Photography System Price: 150000.00
    I. System Configuration
    Number of serial number fittings name
    1 host 1 set
    2 mainframe batteries 1 Section
    3 field of view magnifier 1
    4 254 nm ultraviolet lamp (8w, 12v) 1
    5 Ultraviolet lamp power cord 1
    One arm in 60,000 directions
    One fixed clamp for 70,000-direction arm
    8 Digital Camera 1
    9 Digital Camera Standby Battery 1
    10 Digital Camera Battery Charger 1
    11 Digital Camera and Computer Connection Line 1
    12 protective gloves 2 pairs
    130,000 Defoe Waterproof Packaging Box 1
    II. Product Function
    1. Convert the ultraviolet image into visible image and present it on the eyepiece.
    2. Connecting the optical camera to photograph the ultraviolet image of the trace directly by film can achieve 1:1 photography.
    3. Connect the digital camera to take pictures of the image on the screen of the Ultraviolet Image Converter.
    4. Equipped with strong light protection device, when encountering strong light, the host machine will automatically shut down.
    5. It is equipped with laser spot to indicate the center of the field of view.
    III. Structure and Technical Parameters of Major Fittings
    1. Host structure
    (1) The front end of the host is 254 nm band-pass ultraviolet filter, which should not be removed in general.
    (2) The back of the filter is the aperture adjustment ring of the lens. Rotating the aperture adjustment ring can adjust the aperture in the range of F5-22.
    (3) The front focusing ring is behind the aperture adjustment ring, which is used for image focusing.
    (4) The front focusing ring is followed by an optical camera interface.
    (5) The optical switch knob is on the side of the camera interface. Used to control the internal reflector, choose to transmit light from the lens to the ultraviolet image conversion tube or optical camera.
    (6) The rear focusing ring is behind the camera interface for image focusing.
    (7) Behind the rear focusing ring is the eyepiece focusing ring, which is used to adjust the focal length of the eyepiece to suit the difference of human vision.
    (8) On the side of the eyepiece adjusting ring is the eyepiece fixing pin.
    (9) There is a battery box cover on the side of the lower end, and a main switch and an on-off indicator lamp on the back board.
    2. Ultraviolet Image Converter
    Optical Sensitivity 265uA Im-1 of Effective Input/Output Channel Diameter_18mm
    The maximum output brightness of the screen is 9.5 CD m-2 and brightness gain 4300 CD m-2 Lx-1
    Equivalent background illumination 0.06uLx in the spectral induction range of 200-900 NM
    Central Resolution 45Lp mm-1 Military Level
    Lifetime of 45 Lp mm-1 Edge Resolution
    3. Ultraviolet Lens
    The edge angle of 100mm geometrically distorted image is less than 0.1
    Aperture F5-22 image size 24mm x 35mm
    JGS1 Quartz Glass (Antireflective Coating)
    Spectral Bandwidth 190-2000 NM