细节展示放大镜特效

Prison IP Network Emergency Alarm System

  • No:PTK-7416
  • Quantity:

      Recommend

    & Oslash; IP Network Emergency Alarm System

    Emergency alarm is to install alarm buttons concealedly or openly in the duty room, office, conversation room, gatekeeper's duty room, factory office and key parts of the prison area, to alarm the emergent alarm situation, and to connect to the monitoring center through the network to realize the function of rapid joint disposal. Perimeter alarm and emergency alarm are shared. The alarm system should provide SDK development kit or dynamic library, provide standard bus encapsulation interface of prison integrated management platform or third-party integrated platform, so that the platform and client can operate and manage the system according to their authority.

    Terminal equipment: useIPNetwork Alarm HostPTK-7416Using the prison internal network, the alarm information of each detection point is passed throughPTK-7416The network alarm host transmits to the command center to receive the alarm.PTK-7416The network alarm host can report two command centers to receive the alarm at the same time.

    1. Prisons (four floors)

    1.1 One layer is equipped with a host and an alarm button. The button is divided into two channels to signal to the host on the first and second layers.1Defense Zone, Button Paper

    After the police, the first and second tier hosts1The defense area receives the alarm at the same time, and then passes through.IPNetwork transmission to three alarm centers

    (Armed Police Squadron, Monitoring Center, Total Duty Room).

    1.2 The second floor is equipped with a host and an alarm button. The button is divided into two channels to signal to the first and second floor hosts.2Defense Zone, Button Paper

    After the police, the first and second tier hosts2The defense area receives the alarm at the same time, and then passes through.IPNetwork transmission to three alarm centers

    (Armed Police Squadron, Monitoring Center, Total Duty Room).

    1.3 Three layers are equipped with a host and an alarm button. The button is divided into two channels to signal to three and four layers of the host.1Defense Zone, Button Paper

    After the police, the three-and four-tier hosts1The defense area receives the alarm at the same time, and then passes through.IPNetwork transmission to three alarm centers

    (Armed Police Squadron, Monitoring Center, Total Duty Room).

    1.4 Four layers are equipped with a host and an alarm button. The button is divided into two channels to signal to the host on the third and fourth layers.2Defense Zone, Button Paper

    After the police, the three-and four-tier hosts2The defense area receives the alarm at the same time, and then passes through.IPNetwork transmission to three alarm centers

    (Armed Police Squadron, Monitoring Center, Total Duty Room)

    Each floor is equipped with an alarm display board, which uses five flashlights to represent the five floors. After one floor is alarmed, the other four floors receive alarm information to facilitate near processing.

    The juvenile prison building shall be installed in total according to the above allocation.3Network host,3An alarm button, 3An alarm display panel.15An alarm flash.

    Total:7Desk Host,7A button,7An alarm display panel,20An alarm flash.

    2. Criminals'canteen:

    Two hosts and an alarm button are installed in the criminal canteen. The button signals two ways to the two hosts in this building. After the button alarms, both hosts receive the alarm at the same time, and then pass through.IPThe network is transmitted to three reception centers (Armed Police Squadron, Monitoring Center and Total Duty Room). Total2Desk Host,1A button.

    3. Workshop (Technical Teaching Building and1/2/3/4No. board room)

    Workshops refer to the configuration of supervisory buildings, totally7Desk Host,14A button.

    4. Gates

    Gate fitting2Desk Host,2A button.

    5. Meeting Center

    pretend2Desk Host,1A button.

    & Oslash; Prison Monitoring Center

    Use of prison surveillancePTK-8500IPThe network alarm center receives the alarm machine, which downwards connects with the front-end perimeter system and the emergency alarm system, upwards connects with the alarm management platform software, and is provided free of charge through us.SDKThe dynamic database of the development kit is connected with the software of the unified management platform of the monitoring and command center or the software of the third party centralized management platform to realize the unified dispatching and linkage control.

    In the surveillance center, it is necessary to handle the alarm situation conveniently, simply and in real time. After the actual incident occurs, the software should first pop up the electronic map and the video image of the event discovery site, which should be automatically drawn on the large screen.LEDThe voice electronic screen automatically displays and broadcasts the alarm content.

    8500 central alarm host receives alarm signals and transmits the status information of defense area to local area through serial interfacePC。 All events can be monitored and managed by software, and corresponding electronic map can be displayed. Through relay module and matrix system, the monitoring video picture can be quickly transferred to the alarm area.

    PTK-7416 alarm host has strong practicability and is widely used in various security systems such as prisons. It can realize computer management and integrate with other systems conveniently. The system adopts modular design. The expansion module includes single-defense alarm module, single-defense zone with output alarm module, eight-defense zone alarm module and eight-defense zone. Small host,16Video link module,32A variety of modules are available, such as road electronic map linkage module, live voice alarm electronic display screen, network transmission module, alarm management platform software and so on.

    Host can also be extended to16It has three communication networking modes: bus and local area network.

    System working mode: when an alarm occurs, first trigger the detector part, or press the rescue button in case of an emergency. After receiving the alarm, the alarm module uploads it to the alarm host of the monitoring center through the bus. The control host receives the alarm and confirms that the alarm is received, immediately return the response signal to the alarm module to confirm that there is no handshake. Handle the mistake immediately. After a series of processing, the computer calls the data in the database and pops up the electronic map on the computer software. At the same time, the video image of the accident site is displayed on the big screen and broadcast by the real person.LEDThe alarm display screen displays and broadcasts alarm information. In dealing with the police situation, the monitoring center mobilizes the police force according to the distribution of security forces in nearby areas, combating crime quickly and effectively, and protecting the lives and property of the people.

    2.1 Main Functions

    2.1.1 Host can be connected at most16An alarm device (address codes from the ____________000reach015The alarm equipment includes the single defense area alarm module.

    The alarm module of the Eight Defense Areas, the alarm small host of the Eight Defense Areas,16The circuit relay linkage module,32Linkage Model of Road Electronic Map

    Block.

    2.1.2 is acceptable at most8Chinese LCD Keyboard (Address Code)1reach8Management separately8A separate area, in which1

    Number keyboard is the main keyboard, which can be managed.8For each area, the others are from the keyboard.

    2.1.3 Each defense area can have a variety of linkage output, including: alarm linkage, deployment and evacuation linkage, abnormal linkage. Yes?

    It realizes the functions of linkage with electronic map, hard disk camera, local alarm and so on.

    2.1.4 can connect multipleLEDSpeech live broadcast alarm display screen.

    2.1.5 Withdrawal by keyboard password, remote control and central computer/Deploy troops for defence.

    2.1.6 can be deployed regularly or in a single defense area.

    2.1.7 The remote control can be used to carry out the operation of distribution, evacuation and perimeter distribution.

    2.1.8 The main keyboard is used to deploy and evacuate a single area, device or defense area.

    2.1.9 The main keyboard operates the linkage device individually or totally.

    2.1.103Level password permissions,Including system programming, user programming, user use.

    2.1.11 can be connected with the central computer software to realize the management of electronic map and deployment and evacuation operations.

    2.1.12 Through network module and alarm center, network alarm and deployment and evacuation management can be carried out through LAN.