Product introduction
IQ-350 pump-suction single-gas detector
Can measure any of more than 150 toxic or flammable gases
:: Solid-state sensor life of more than 10 years
Optional electrochemical sensor/IR infrared sensor/PID sensor
:: Built-in sampling pump, sampling tube can be sampled remotely
:: Digital display of gas concentration
:: Sound and light alarm, low/high 2 alarm points, user-adjustable
:: Carry-on bag cleansable for easy contamination removal
Technical parameters:
Working power 4'C' alkaline battery, AC adapter/charger, optional nickel cadmium rechargeable battery
Battery life Alkaline battery 20 hours;
Sensor Type Optional Solid State Sensor, Electrochemical Sensor, IR Infrared Sensor, PID Photoionsensor
Gases and ranges The user can specify any of the more than 150 gases.
Resolution 0.01 ppm (0-10ppm); 0.1ppm (10-100ppm); 1ppm (100-1000ppm)
Accuracy and plusmn;5%
Sampling method Built-in sampling pump, sampling tube length of about 1.2 meters, suitable for remote or difficult-to-reach spatial sampling
Show 3-bit LED digital display
Alarm Sound and light alarm, low/high 2 alarm points, can be set by the user
Low voltage indication Continuous sound and light prompt
Fault indication Continuous sound prompt, "ACTIVE" light off
Ambient temperature Operating temperature -20 c -50 degrees C;
Ambient humidity 0-99%RH, non-continuous condensation
Housing Aluminum housing
Dimensions 181.1 x 85.9 x 101.6 (mm)
Weight 1.14kg (including battery)
Standard configuration:
Host, sampling tube, alkaline battery, 110VAC adapter/charger, manual, calibration certificate, carrying case
Optional accessories Nickel cadmium rechargeable battery, 110/220VAC converter