SmartCor-T640 Network Version
ITherml SmartCor-T series is the only infrared thermal imager with no shield technology, smallest volume, lightest weight and continuous video output of thermal image temperature without any interference in the world.
SmartCor-T series infrared thermal imagery has incomparable image performance, accurate temperature measurement, strong compatibility of standard output, and is very convenient to integrate in a variety of infrared thermal imaging temperature measurement application systems. Smart Cor-T not only integrates all kinds of infrared temperature measurement systems, but also can be fixed, directly remote detection and temperature measurement, providing thermal imaging for user monitoring scenes, timely detection of hidden dangers. Widely used in industrial automation online detection, UAV patrol, public scene monitoring, petrochemical refinery, forest fire prevention, perimeter alarm and other scene applications.
Technical characteristics
Leading Stepless Film Technology for Real-time Continuous Video Transmission
Small size: 38 x 38 x 26 mm
Weight less than 55g
Low power consumption less than 1W
Automatically track the highest, lowest and average temperatures and display temperature values
Temperature analysis of point, region and isothermal, automatic temperature alarm
Real-time on-line analysis of temperature thermal imaging transmission
Supporting Network Video Output
Various lenses are available without correction.
IP54 protection level, easy to install (optional)
Small size, light weight, low power consumption, easy integration
technical parameter
Detector data |
|
Detector type |
Uncooled microbolometer |
Detector resolution |
640 x 480 pixels |
pixel size |
17μm |
Wavelength range |
8~14μm |
Image performance |
|
NUC |
Non-shield Technology |
Thermal sensitivity (NETD) |
<50mk |
Time to image |
Less than 5 seconds |
frequency |
50|60Hz |
FOV |
40°*24.2°|19mm |
Digital zoom |
Two times, four times, (continuous zoom is optional) |
Color code |
Five color standards are available (white heat, black heat, iron red, brown, ice fire) |
Image Settings |
Automatic | Manual, Gain and Brightness Adjustment |
Image control |
Image mode, gain, polarity, zoom, color ticket, system settings, etc. |
Thermal imager control |
Automatic | manual via GUI, or serial commands |
Thermometric analysis |
|
Measuring range |
- 20 to + 500 degrees Celsius |
Accuracy of temperature measurement |
& Plussmn; 3 (-20 (-0 C), & Plussmn; 2 (-0 (-100 (-100),& Plussmn; 2% of reading (+100 (-500 ()) |
Thermometric correction |
Automatic | manual |
Standard version |
1. Central point temperature measurement |
Advanced version |
1. Supports temperature measurement at 8 points and 4 square areas. It can capture the highest and lowest temperatures in square areas, and can be queried through serial ports. |
physical property |
|
Weight (without lens) |
<55g |
Size (without lens) |
38 x 38 x 26 mm |
Interface |
10 M2 X 4, UNC & frac14; "-20 (optional) |
encapsulation |
IP67 (Lens) |
environmental data |
|
Working temperature range |
- 20 to + 60 degrees Celsius |
Storage temperature range |
- From 50 to + 70 C |
To hit |
500g shock wave; with 11ms tooth wave |
shock |
4.3g, 3 axes, 8 hours per axle |
temperature |
5%-95% non-condensation |
Packing |
|
standard |
Infrared Thermal Imager (No Lens), Connecting Line, Instructions (CD), Quality Guarantee Card |
Optional |
Infrared lens |
Interface |
Standard electrical interface |
Electrical interface |
20-pin | 50-pin output |
Control Port |
UART | RS232 LVCMOS + 2.5V-3.3V (RS485 & amp; RS422 optional) |
working voltage |
VDC: +2.8V ~ 5.5V (typical operating voltage + 3.7V) |
Power waste |
Smart Cor-T384 is less than 0.8W |
Analog Video Output |
PAL (standard), NTSC (optional) |
Digital Video Output |
BT.656 (Standard) |
Network Video Output |
IPC version |
|