Smart Cor384 Network Output Version Core
ITherml Smart Cor Series
Infrared thermal camera core has unparalleled characteristics and performance, and can meet different application environments and needs. Because the mechanical and electrical functions of 640 and 384 are the same, integrators can be directly compatible with each other when using different thermal image integration, and the selection of lenses is also universal.
SmartCor Series is a leading non-shield technology that provides continuous non-interference real-time infrared images. The core series is small in size and low in power consumption, which meets the requirements of the National Military Standard. It is an ideal choice for infrared integrated equipment such as UAV, thermal image handheld equipment, monitoring and so on.
Leading non-shielding Technology
384 x 288 pixels
Ultra-low power consumption < 0.7W
Small Volume 38 x 38 x 20.5 mm
Light weight < 50g
Instantaneous boot < 3 seconds
Standard pseudocolor analog video output
Network Video Output
Adjustable line-of-sight cursor
Continuous non-interference real-time image
Supporting graphic and text upload
Multi-clock lens is optional and customizable
technical parameter
Detector data |
|
Detector type |
Uncooled microbolometer |
Detector Pixel |
384 x 288 pixels |
Pixel spacing |
17μm |
Working band |
8~14μm |
Thermal sensitivity (NETD) |
<40mk |
Frame rate |
50|60Hz |
Image performance |
|
Nonuniformity Correction |
Non-shield Technology |
Boot-up time |
Less than 3 seconds |
Electronic zoom |
Two times, four times (continuous zoom is optional) |
Image control |
Graphic Mode, Polarity, Digital Continuous Zoom, Pseudo-color or Black-white, Image Detail Enhancement Technology |
Gain & amp; brightness & amp; sharpness |
Automatic | Manual, Cyclic Adjustment |
Aim at the cross cursor, text |
Yes, customizable and adjustable. |
Core control |
Automatically, manually (through GUI or control commands) |
A main board |
|
Main electrical interface |
50-pin output |
Communication Control |
UART|RS232 LVCMOS +2.5V-3.3V |
Analog output |
PAL (standard), NTSC (optional) |
Digital output |
BT.656 (standard), LVDS and CMOS (optional) |
Expansion board |
|
Electrical interface |
20-pin output |
Analog output |
PAL (standard), NTSC (optional) |
Digital output |
IPC Network Video Output |
Communication Control |
UART | RS232 LVCMOS + 2.5V~3.3V (RS485& RS422 optional) |
Power Supply |
|
working voltage |
VDC: +2.8V ~ 5.5V |
Typical operating voltage |
VDC: +3.7V |
Power waste |
Less than 0.7W |
Reverse connection protection |
Support |
Overvoltage and undervoltage protection |
Support |
Environmental Science |
|
Working temperature range |
- From 40 to + 60 degrees Celsius |
Storage temperature range |
- From 50 to + 70 C |
physical characteristics |
|
Weight (without lens and rear cover) |
<50g |
Size (without lens and rear cover) |
38 x 38 x 20.5 mm |
temperature |
5%-95% non-condensation |
Working altitude |
+ 12,200 metres |
To hit |
200 g shock wave; with 11ms tooth wave |
Vibration resistance |
4.3g, 3 axes, 8 hours per axle |
thermal shock |
5 & deg; / min |
encapsulation |
IP67 (Lens) |
Fixed hole |
10 M2 X 4, UNC & frac14; "-20 (optional) |
Packing |
|
standard |
Infrared Thermal Imaging Core, Connecting Wire, Operating Instructions, Warranty Card |
Matching |
Infrared lens |
|