Product introduction:
Overview: The detector is designed by UV185-260nm flame narrow spectral signal rail-to-rail acquisition/full pulse analysis technology (PPW), which avoids the vulnerability of conventional detectors. The detection environment is monitored by the slope increment signal detection technology (PAM), which improves the stability and continuous use of the detector. To ensure that the detector in the minimization of false positives at the same time, the ability to quickly complete flame identification detection of fire, through the CPU detection tube monitoring, extended the life of the detection tube. Detectors are suitable for all types: oil depots, liquor stores, hangars, chemical equipment sites, military equipment sites, liquefied gas stations, power stations and other fires when the fire started without a vulva stage or less vulva stage, but to directly produce open fire-based sites. With high anti-jamming ability, not affected by wind, high temperature, high humidity and natural artificial light source, can work well indoors or outdoor environment. Detector using a six-wire connection mode (two power cords, two fire contact lines, two fault contact lines), alarm when the fire contacts from the normal opening change normal closed, reported fault contacts from the normal closure, can be connected with any manufacturer's fire alarm system. Main technical parameters: operating voltage: 20 to 35V static operating current: 18mA plusmn; 5mA alarm state current: 32mA plusmn; 5mA response time: 0.5 to 10 seconds Fire sensitivity: 1 m to 40 m can respond. (Flame height: 0.1m to 1.3m flame) Detection angle: s 100 sdeg; rotation angle: 360 sdeg; pitch angle: 90-deg; explosion-proof sign: ExdII.CT6 Protection rating: IP65 Ambient temperature: -35 to 85 c relative humidity: s98% RH (45 plusm; 2C Status indication: Green working light, red alarm indicator output mode: fire relay: closed when alarm. Fault relay: Normal closure fault open. (Pulse output optional)
