Foam tankIsAccording to the filling foam liquid is divided into capsule type, ordinary type, according to tank installation method is divided into horizontal, vertical two forms. Foam mixing ratio is generally3%Or6%, standard mixing fluid flow16- 200L/S。 Operating pressure range0.６-1.5Mpa.Foam storage tank volume500-15000LDifferent specifications, any match. Product basedQ/WTDetection F2010-2005Pressure foam ratio mixing device.
OneStructure The main series of products are tank, capsule, proportional mixture, inlet pipe, drainage pipe, drainage valve, sewage valve, safety valve, pressure gauge composition. Each line is equipped with a valve, the inlet line is equipped with a pressure gauge, capsules are installed in the tank body, its inner cavity and tank cavity are separate.
TwoFoam tankWorking principle Pressure water through the water pipe into the tank body, the pressure squeeze capsule so that the foam liquid through the liquid pipe is extruded, so that the foam liquid and the proportion mixer in the water automatically mixed into a certain proportion of mixed liquid, flowing through the air foam generator, foam gun spewing foam, fire extinguishing work.
ThreeFoam tankMain uses The series of products are widely used in oil depots, petroleum, chemical, natural gas, power plants, textile and cotton, docks, gas stations, storage, high-rise buildings, fuel boilers, underground garages and other places. Foam fire extinguishing device is a new and efficient fire-fighting product developed for such places as garage, parking lot and fuel boiler room. The self-adjusted foam ratio mixer of the key components of the system is a technological innovation of foam fire extinguishing equipment. It can always maintain a certain mixing ratio in a large flow range, plus water-forming film foam extinguishing agent its protective film fire extinguishing effect.
The system has the following significant features: (1) foam extinguishing agent has membrane and membrane self-healing. Strong resistance to resonant; (2) foam liquid can be stored for 20 years without deterioration. The general foam liquid can only be stored for 2 years; Is the general foam fire extinguishing agent 2 to 3 times; (4) suitable for non-inhaling foam injection device; (5) The applicable foam mixture flow range is large, the mixing ratio is accurate, suitable for 3% type and 6% type foam liquid; is a mechanical drive; (8) corrosion resistance. The components are made of stainless steel and copper alloys.