Brief introduction:
Built-in high resolution detector (384x288) ensures that users can clearly see the observation target at a long distance.
The frame frequency of the product is 30 Hz, which ensures clear imaging when observing moving targets.
The thermal imager has a magnification of 1.1 times and a digital zoom of 2 times.
Quantum thermal imager can work normally when thrown at minus 25-deg. It has built-in anti-freezing OLED display. The image quality is no different from that under normal temperature.
Quantum S monitoring mode is optional to ensure that users can use it under specific monitoring conditions and get the best results. There are three background adjustments for thermal imagery: & laquo; City & raquo; (high contrast), & laquo; Forest & raquo; (low contrast) and & laquo; recognition & raquo; (improved the detailed presentation of thermal image observation targets).
Quantum S can realize three optional calibration modes of selective detectors: silent manual (& quot; M"), automatic (& quot; _") and semi-automatic (& quot; H"). Mode A refers to calibration with complete automation and without user intervention. (The start of the calibration process (the time when the calibration mechanism dimmer is put down) is determined by the procedure.
& quot; _ & quot; mode: the user can adjust the matrix according to the image quality, and start calibration after pressing & quot; Cal & quot; key.
When the lens cap is closed, after pressing the key, manual adjustment can be made (& quot; & quot;). This mode is silent mode and is recommended for hunting.
Quantum thermal imager with fast start function, users can press the button for 5-7 seconds to use observation, this function is the best rapid start index standard for similar products.
By adjusting the buttons near the objective lens, the required brightness and contrast effect can be obtained.
All Quantum series products have analog video output function. By analog video output, the fuselage can be connected with peripheral devices, and the image can be displayed on the display.
The product is made of carbon composite material with strong toughness. The surface of the fuselage is partially covered with rubber. It is convenient to use when the hands are wet and will not slip.
Technical parameters:
| Electronic component |
|
| Detector resolution |
384x288 |
| Frame frequency,Hz |
30 |
| Spectral Range Sensitivity, Micron |
7,7 … 13,2 |
| Display type |
OLED |
| Display resolution, pixels |
640x480 |
| |
|
| optical performance |
|
| Amplification ratio,x |
1,1 |
| Digital zoom, x |
2 |
| View angle, °Level/vertical |
26,8x20,8 |
| Diopter adjustment |
± 5 |
| Visual distance |
|
| Detection range, m (whole body target size,1,7*0,5 rice·） |
500 |
| |
|
| Power Supply |
|
| supply voltage, V |
4 ÷ 6 |
| Battery type |
4xAA |
| Battery life, hours |
5,5 |
| External power supply |
DC 8,4 ÷ 15 |
| |
|
| Appearance and use |
|
| Protection level (according to IEC 60529Standards) |
IPX4 |
| The temperature range can be used.°С |
-25 ... +50 |
| Dimensions, millimetres |
180x86x58 |
| Weight (without battery), kg |
0,32 |
