Home>Equipment list>Fire/emergency rescue equipment>AQC-SD02 new automotive tungsten steel head safety hammer
细节展示放大镜特效

AQC-SD02 new automotive tungsten steel head safety hammer

  • No:AQC-SD02
  • Quantity:

      Recommend

    AQC-SD02 new automotive tungsten steel head safety hammer

    1.Material: ABS, Tungsten Steel Head, 45, Steel

    2. Color: Red

    3. Size: 16.5 x 8 x 1.5 (cm)

    4.Weight: 180g

    5. Function: Emergency window break escape, cut seat belt

    Third, the use of methods:

    In case of emergency, remove the fire hammer and select the position where the glass is tapped (four corners, approximately 5cm from the window frame);

    Fourth, precautions:

    1. Because the middle part of the tempered glass is more solid, the four corners and edges are weak. So, when there's a danger, it's good to hit the edges and corners of the glass with a fire hammer, especially in the middle of the edge above the glass, and once the glass cracks, you can knock it a few more times. It is said that about 2 kg of pressure can break the corners of the tempered glass.

    2. Equipped with a fire hammer, put it in a desirable position at hand.

    3. In the event of an emergency, the driver should drop the hammer from the left and right center slower in two-thirds of the way down to ensure a quick exit. Hitting the glass with a fire hammer will be significantly stronger than blunt instruments such as pebbles, and general tempered glass can be crushed.