Title: Line Channel Plate - Rubber Channel Plate - PVC Line Channel Plate - Plastic Line Channel Plate - Stage Line Channel Plate - Line Channel Plate
1. Description of parameters of groove plate:
Name: Line groove plate
Model: SY-XCB-5C10T
Floor Material: Rubber Cover Material: PVC Plastics
Specification: 900mm * 550mm * 55mm
Weight: 16Kg/block
Groove diameter: 42mm * 42MM (wide X high) 5 (hole)
Load bearing: 10 tons
Packaging: woven bags
2. Introduction of Line Groove Plate
1: The base part of the product is pressed by rubber, and the cover plate is pressed by PVC plastic. The performance is very good.
2: This product belongs to the combination product (cover can be turned over)
3: Only three grooves or more are screw holes fixed, up to five grooves (screw holes are suitable for long-term use outdoors, long-term use over cables, or wires).
3. Instructions for the Use of Line Groove Plates
1: Suitable for performing activities, stage wiring, lighting wiring, exhibition hall wiring, indoor wiring, mechanical wiring, engineering wiring, site wiring and other venues. Suitable for outdoor indoor wiring.
2: The corner of this product belongs to the vulnerable part. When unloading, the corner should not be downward.
3: This product belongs to rubber products. It will be mildewed if the time limit is too long. It is easy to rot. It is suggested that users should get sunshine in the place where the time limit is more than 5 months. (It is suggested that users should put it in a ventilated and dry place.)
3: After-sales instructions for trough boards
1: The loss and compensation for the use of products in transit shall be borne by our company.
2: Users should use products according to our regulations. The quality problems caused by cross-border use have nothing to do with our company.
3: The warranty period of this product is less than 3 years. According to the place of use, there is no specific requirement for this product.
