This product is suitable for medical unit radiology for rapid drying film.
Structural features
1, the product is a vertical structure. The top features an extra large viewing window. Observation window using impact-resistant special materials manufacturing, the use of safe, solid, novel and beautiful shape.
2, the box is made of high-quality thin steel plate. By the micro-computer intelligent thermostat, electric fan, electric heater and other three main components. Eighteen pieces of film can be dried at the same time.
Technical parameters
Temperature control range: room temperature, temperature fluctuations: s 1c display and given error: splusmn;
Operating voltage: AC 220V, 50Hz motor power: 15W electric heater power: 600W x 2
Studio size (cm): 59 x 37 x 57 form factor (cm): 65 x 51 x 95 box size (cm): 80 x 67 x 100
Net/gross weight (kg): 80/115
Temperature controller:
Features
1, temperature sensor: temperature: DIN A-class s5mm Stainless Steel PT 100 x 1 branch, temperature control mode: P.I.D automatic calculation plus Fuzzy control;
2, temperature conversion: micro-computer linear compensation correction, display interface: digital tube display, key input mode;
3, timing range: 1. 1 to 9999 minutes; 2. No timed continuous operation;
4, human operation: automatic control: temperature thermal output power adjustment, P.I.D calculus control... Etc. , safety self-test: the main system components safety self-test, when an anomaly occurs by the controller to indicate the status and stop heating.
Key features
1, temperature display accuracy: 0.1 degrees C, temperature control accuracy: plusmn; 0.1 degrees C, deviation value correction: temperature deviation value compensation, correction function, I/O self-test: safety self-test function, automatic power off protection and fault indication when abnormal occurrence;
2, automatic calculus: microcomputer automatic calculation P.I.D. With the power control of solid-state relays, temperature control is more accurate (proportion, integral, differential and solid-state relay control mode);
3, temperature upper and lower limit protection: can be set the temperature protection upper and lower limit, protection device: controller monitoring safety protection system and preventive type of fault self-test control.
Structures and materials
1, inner box material: SUS-304 stainless steel mirror panel, external material: SPCC cold-rolled steel plate electrostatic powder paint treatment, insulation material: ultra-fine fiber glass cotton;
2, box door: observation window: multi-layer hollow tempered glass window, opening direction: single door design, top opening mode, shelf: stainless steel grille shelf x 2 blocks; Each layer adjusts at an adjustable height of 50 mm.
Temperature electric heat and cycle:
Air delivery mode: High-impedance motor shaft flow fan. The air delivery mode is the design of the horizontal air-out arc cycle, the heating system: the intelligent computer automatic control electric power balance temperature control and electric wire heater.
Safety protection
1, circuit breaker: small switch circuit breaker, controller internal protection: temperature sensor: open or short (overrange), overtemperature protection: set temperature protection setting;
2, fault abnormal alarm: when the fault abnormal, automatic power off thermal protection, issued an alarm tone.
Surrounding environment
The acceptable ambient temperature range: 5 to 40 degrees C, the best performance of the ambient temperature range: 15 to 30 degrees C.
