FL4810 Remote Aizid LED
Brand: Win Town Lighting
Model: FL4810
Name: Remote azimuth lamp
Origin: Shanghai
First, the applicable place:
It is suitable for power, railway, industrial and mining enterprises and other industries and places to make mobile signal indications and warning signs.
Suitable for all kinds of construction, rescue, rescue staff as warning signs, square instructions and signal contact.
Second, structural characteristics:
1, at a distance of not less than 4800 meters with strong signal and warning effect, especially suitable for railway and road inspection, construction personnel and traffic police and other special operations personnel use.
2, after a full charge, its continuous flicker time is not less than 10 hours, to meet the needs of the work on duty.
3, high-energy non-memory environmental protection battery charge and discharge performance is good, low self-discharge rate, long cycle life, shell using imported bulletproof adhesive material, can withstand strong collision and impact.
4, shell protection according to IP65 design, can resist high-pressure water cannon direct fire, heavy rain spray and wave sputtering.
5, small size, light weight, can be stuck on the belt or in other parts of the body to use, but also the use of magnetic adsorption on the surface of steel objects or fixed hanging on the support.
6, red, yellow, green can choose one.
Third, technical parameters:
Rated voltage 2.4V
Rated capacity 2000mAh
Flash frequency 1.5 plusmn; 0.5Hz
Average current 160mA
Continuous working hours (10h)
Charging time 8 to 10 h
Weight 0.29 kg
Housing protection class IP65
Four, the instructions for use:
1, start and close: toss the bottom switch, you can turn on or off the azimuth.
2, wearing mode:
Clamping: Pull the steel clip apart and snap into a belt or soft support.
Hanging: Hanging on the support body with a hook.
Strap: Use the strap of this product to tie the azimuth lamp around the waist or in other parts of the body.
Adsorption: The luminaire back magnet can be attached to the steel surface.
Fifth, make the precautions:
1, carry or transport, should ensure that the button switch from external contact, so as not to turn on power consumption.
2, in the environment of higher temperature places to charge or continuous discharge, the luminaire cylinder slightly hot, is a normal phenomenon.
3, can only use a special charger to charge the lamp.
4, do not arbitrarily replace the light source, remove the lamp structure and seals.
5, after use in a corrosive environment should wipe the surface.
6, when the battery is used up, please charge it in time.
Six, so that the quality assurance
This product in strict accordance with ISO9001:2000 international quality management system standards for quality control, to ensure that product quality is higher than national standards, fully meet the design requirements, product s3-year warranty (light source warranty for 1 year). Within 3 years from the date of purchase, any failure under normal use of the product shall be maintained free of charge by the Company
