Home>Product list>Anti-terrorism technology equipment>Non-lethal weapon>New Standard Single Police Dispersion Ejector Testing Report on Vertical Dispersion Ejector of Horizontal Dispersion Ejector
细节展示放大镜特效

New Standard Single Police Dispersion Ejector Testing Report on Vertical Dispersion Ejector of Horizontal Dispersion Ejector

  • No:C1
  • Quantity:

    Single Police Equipment for Public Security

    Dispersion ejector

    Transverse jetC1

    The single equipment dispersal ejector of public security is used for the ejector which can strongly stimulate the eyes, nasal cavity, oral cavity and bare skin worn by public security policemen in daily law enforcement.

    The transverse spray ejector is composed of safety cover, cross beam, pressure handle, nozzle, support cover, conical spring, inner tank, bag assembly, dispersant solution, external tank and other parts. The dispersant is synthetic capsaicin.

    Quality standards: GA 884-2018 Dispersion ejector for police equipment


    Jiangsu Colin Police Equipment Manufacturing Co., Ltd.

    0523-82882200 82882211


    Product parameters

    parameter

    Transverse jet

    high

    176 mm±2 mm

    Outer diameter of barrel

    39 mm±1 mm

    Outer diameter of external tank

    37.5 mm±0.5 mm

    Outer diameter of external tank

    8 mm±1 mm

    Observation window height

    80 mm±1 mm

    weight

    195 g±15 g

    Dispersant

    Synthetic chilli water

    Injection mode

    Directional jet injection

    Guarantee Period

    3year

    Jiangsu Colin Police Equipment Manufacturing Co., Ltd.

    0523-82882200 82882211


    Technical Indicators

    entry name

    Technical Indicators

    Appearance

    Clean appearance, no distortion, no dispersant odor. The surface of each part should not be damaged by machinery, coating peeling off and rusting. All parts should be assembled tightly and firmly. Symmetrical transparent observation windows should be provided on both sides of the tank. Dispersant solution in tank should be uniform, without obvious oily substance and flocculent substance. The appearance and quality of the dispersive ejector shall conform to the standards approved by the competent authority.

    structure

    The transverse spray ejector shall consist of safety cover, cross beam, pressure handle, nozzle, support cover, conical spring, inner tank, bag assembly, dispersant solvent, external irrigation and other parts.

    size

    High profile dimension of transverse jet dispersive ejector176mmAddition and subtraction2mmThe maximum outer diameter of the cylinder body is39mm±1mmThe outer diameter of the outer tank is37.5mm±0.5mm。 The size of the observation window should be8mm±1mmHigh80mm±1mm

    colour

    Dispersion ejector body color should be black, nozzle color should be white, dispersant solvent color should be blue.

    Identification

    The front of the ejector should have laser carving pattern of "police badge" and "police".POLICE"Dispersion ejector" should be clear and complete. The pattern of "police emblem" should conform toCA 244Specification, height and size25mm。 The word "police" is in bold type 2 with space between words8.5mmLocated just below the warning sign; "POLICE""Dispersion ejector" is the word "No. 2 blackbody", located below the warning. On the back of the ejector, the unique number of the laser engraving product should be in bold type and the height of the character should be as follows3.5mmNumber lower end spacing,Bottom plane of body4.5 mm±1mmThe bottom of the tank body should be permanently marked with the date of production and expiration of the product, the font in bold type and the height of the font in bold type.2.5mmThe first four are years and the last two are months.

    quality

    The mass of the transverse jet dispersive ejector should be as follows195g±15g

    Dispersant solution

    The volume of dispersant solution is70ml±3ml, Contains solute (synthetic peppermint) and solvent, synthetic capsaicin content is1. 5% -2.0% (Percentage of mass). Solvent composition is specified in the table below.

    Serial number

    component

    Content (Volume Percentage)%

    1

    Glycol

    50±5

    2

    12-Propylene glycol

    25±2.5

    3

    tween20

    5±0.5(Qualitative analysis)

    4

    ethanol

    5±0.5

    5

    distilled water

    Supplementary Scalar Value

    Injectivity

    Continuous Injection Performance: Dispersion ejector injection should be directional jet, injection distance should be large or equal to4mEffective injection time greater than or equal to7s。 The amount of residual solution after complete injection is less than or equal to7ml

    Intermittent Injection Performance: Effective Injection of Dispersion Injector3sAfter placing8hAfter the injection, the injection distance should be greater than or equal to3mThe injection distance reaches3mTime should be greater than or equal to4s。 The amount of residual solution after complete injection is less than or equal to7ml

    stability

    DispelAfter aging test, the product surface of ejector should be free from peeling, disintegration and leakage.leakNo burstingAnd shouldsymbolclosecontinuityRequirements for injection performance

    Pressure Safety

    DispelEjector trajectory980NPressure bearingAfter the testShould not disintegrate, not ventleakNo burstingIt should meet the requirement of continuous injection performance.

    Safety cover reliability

    Dispersion ejector should be equipped with a safe and reliable safety cover to prevent misinjection; the safety cover should be equipped smoothly, reset smoothly, the button switch should be tight and moderate, and have enough resilience. Repeated opening and closing of cover100Secondly, it should be used normally and meet the requirements of continuous injection performance.

    Vibration and Drop Reliability

    Acceleration Amplitude of Dispersion Ejector under Miscellaneous Conditions2m/s2The frequency is5Hz-55HzAfter vibration test, it should not disintegrate, leak, burst, cover and nozzle should not loosen.

    After vibration test, the divergent ejector has three postures: vertical, inverted and horizontal.1.5mFree fall to cement floor at high altitude, each test1Secondly, it should not disintegrate, leak, burst, and meet the requirements of continuous injection performance.

    Temperature adaptability

    Dispersion ejector-30~55In the environment of C, it should not disintegrate, leak or burst, and it should meet the requirements of continuous injection performance.

    Jiangsu Colin Police Equipment Manufacturing Co., Ltd.

    0523-82882200 82882211