Structural shape is divided into: O-type parking space lock, K-type parking space lock, T-type parking space lock, U-type parking space lock, F-type parking space lock, A-type parking space lock, square parking space lock, octagonal lock.
Lock installation position, generally installed in the middle entrance of the parking space 1/3, installation conditions required in the cement flat ground. If the parking space in residential area is tile or colored brick floor, the thickness of brick is required to be more than 5 centimeters. If it fails to meet the requirements, the cement prefabricated installation floor can be carried out ahead. The prefabricated area should be determined according to the shape and size of the parking lock.
Installation tools:
Power supply with tens of meters wire, electric drill (drill 12 or 14), hammer, nut socket, tape measure, expansion screw (m10*10 or m10*8), etc.
Installation method:
1. Measure the position with tape measure and then set it right.
2. Connect the power supply, first use the electric drill to align the screw hole lightly to make a mark, and then take off the lock to align the mark to make a hole. The electric drill should be aligned, and the depth should be about the same as the length of the screw.
3. Re-position the lock, align the screw and insert it with a hammer, and finally tighten it with a nut sleeve.
