Reach-300&600
Technical parameters
Project | Camera model | Reach-300 | Reach-600 |
Thermal imaging specs | Detector Pixels | 384 x 288 Pixel | 640 x 480 Pixel |
Cell Spacing | 17um | ||
Focus | No heat (fixed) - Electric focus | ||
Field of View Corner | 9mm~75mm | ||
Electronic Zoom | 2times, 4x | ||
Wavelength range | 8~14um | ||
Frame rate | 50Hz | ||
-20From .C to .500 degrees C | |||
±2℃ | |||
Standard version | 1.Center point temperature measurement | ||
Advanced version | 1.Support situ temperature measurement, 4 square area temperature measurement, can catch the maximum temperature and minimum temperature in the square area, and can be queried through serial port | ||
Visible light specifications | Sensor devices | 795(H)x596(V) | |
Lens | 2.0MP HD,1/2.8” CMOS Progressive Scan, resolution:1920(H)*1080(V),f=4.3mm~129mm(F1.6 to 4.7), 30 x optical zoom, customizable | ||
Video | Composite Video (NTSC and PAL) | Hybrid IP, Analog Video | |
Video format | H.264 | MPEG4 | MJPEG | ||
Hot image mode | Automatic - Manual gain and brightness adjustment, polarity, digital continuous zoom | ||
Head performance | Azimuth - Speed | 360°(Can rotate continuously) - 0.1 -deg;/s to 40-deg;/s variable speed | |
Pitch Angle Range - Speed | -90°s90-deg; .1-deg;/s-12-deg;/s variable speed | ||
Preposition | 99 as standard, customizable | ||
Automatic cruise | Optional | ||
Wipers | Optional | ||
System performance | Protocols and serialports | Onvif, RS485, Pelco-D | |
Ethernet | Support | ||
Development tools | Supports full system control and integration of the SDK | ||
Network protocols | IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, ICMP, IGMP, DHCP, ARP, SCP | ||
Physical performance | Weight (approx.) | 15kg | |
Size (length, width and height) | 256*310*270mm(Side load) | ||
Input voltage | 24V±25% AC | ||
Operating temperature | -20~60-40 to 60 degrees C (optional) | ||
Heater | Automatic temperature control, open: 14-deg; splusmn; 5-deg; off: 24-deg; s plusmn; 5-deg; |