| JD-P5 Technical Parameters | |
Battery | Battery capacity | 500mA |
Charging time | Less than 3 hours | |
Continuous working hours | Over 12 hours | |
Battery Voltage | 3.7V | |
Appearance structure | weight | 60g |
Back clip | The metal clip is combined with the plastic clip and fixed in the middle of the rear shell. It can rotate 360 degrees. | |
Appearance size | Less than 33.9 mm in width * 80 mm in length * 28.1 mm in thickness | |
Protection Level | Shell protection level should meet IP67 requirement of GB4208-2008 | |
Drop Resistance Level | When the bare machine falls freely on the cement floor in four sides of 3M height, the structure of the bare machine is not loose and the electrical part can work normally.。 | |
Interface | Micro USB 5Pin AB Class | |
Tips | Battery bottom electricity detection | 10 3G4UCRM Red Light Flash for Low Voltage Prompt |
Batteries are full of electricity | The green light is off | |
Key | Click | Press the power-on flash to flicker alternately, then press the power-on flash to flicker, the white light to flicker, and turn off three times. |
Long press | Open the lighting mode in three seconds | |
work environment | working temperature | -30~60℃ |
Working relative humidity | 40%~80% | |
parts | Standard accessories | Host, Back Clip, Charger, Data Line |