"Anti-intrusion early warning equipment" is the second level of protection in the three-level protection system of expressway traffic accident scene. When the driver accidentally intrudes into the warning area and the vehicle impacts the anti-intrusion equipment installed on the cone barrel, all the equipment on the scene immediately calls the alarm, and promptly warns the driver that he has intruded into the accident site to take measures such as braking. In addition, any cone barrel installed with anti-intrusion equipment will send out wireless alarm signal when it is hit. At this time, all the staff on the spot who are hundreds of meters away will immediately call the alarm to remind them to evacuate in time.
If you press the speed100kilometre/Hours, depending on the distance of the guard line, this baby is usually available.5.4to7.2Second warning time, usually5.4One or two lanes can be crossed in seconds to escape, thus winning precious time for the on-site personnel to escape.
1. Distance from driving to the rear of the accident site50-550At meter time, the anti-intrusion sensor (induction ring) is placed on the triangular bracket, and the light band can be turned on in dark or at night.
2. When driving to the rear of the accident site, install the alarm receiver to open the alarm lamp, then press the key to complete the layout.
Working mode of alarm
1. The indicator lights will flicker once after power-on to indicate the success of the switch-on, and then press the anti-cloth button for anti-clothing.
2. In the normal state of wireless abnormal alarm information, the sound of sound and light alarm is silent, and the alarm is in the defensive state.
3. When an object intrudes, the sensing ring will send out early warning information. The operator's platform and alarm lamp will give sound and light prompts to warn if something happens and immediately warn or flee.
Matching List of Products
1. Five rings
2. Alarm Handstand 2individual
3. Alarm lights 1individual
4. One Charging Outer Box
Note: (The following data are estimated data and more accurate data are needed after further aging tests)
1. It takes about 3 hours for the ring to be charged each time. When it is fully charged, it can stand by for about 2 days without turning on the light band, such as waiting for sustainable work for about 2 hours.
2. It takes about 2 hours for the alarm handset to be charged each time. It can work for more than 5 hours after full charge.
3. It takes about 3 hours for the alarm to charge each time. It can stand by for about 1 day if it is full of electricity. If it flickers continuously, it can last 2 hours left.
4. Above is the standard data. The actual quantity can be increased or decreased according to the user's demand.