Home>Product list>Traffic management equipment>Signal light>Lane indicator, red fork green arrow signal light
细节展示放大镜特效

Lane indicator, red fork green arrow signal light

  • No:XH-TPD-001
  • Quantity:

    Lane indication beacon product overview:

    Lane indication beacons are generally used in tunnels and toll booths, allowing only one-way traffic. The red fork indicates a no-go pass and the green arrow indicates that the passage is allowed. Existing products200Circular300Circular400Circular400Square and600Square, etc.5species. 400Square and600The square lane indicator can be divided into one-sided and double-sided.


    The 24-hour sales hotline of The Tiger: 18857169066 Mr. Song;

    Product Name: Lane Indication Signal

    Model:XH-TPD-001

    Specifications:200mm300mm400mm600mm

    1.Housing: PolycarbonatePC600mmUsing1.5mmCold-rolled plate, sheet metal sprayed.

    2.Composition: RedLEDTaiwan12milChip, Green LEDTaiwan14milChip, single redLEDThe luminous intensity is not less than2500mcd, single pure greenLEDThe luminous intensity is not less than4500mcd。 The half-strength angle of the light emitting diode is not less than15Brightness angle in line with national standards;

    3.Show: RedX"And green", "red"X"For the forbidden information, green "" for the pass information;

    4.Control: red and green with a separate switch power control, work does not affect each other;

    5.View distance: the visual recognition angle of the logo product should not be less than30, clear display, the distance of view should be no less than200Meters.

    6.Ultra-high brightness light-emitting diodes (LEDdisplay, including red, pure greenLED, average trouble-free time of the luminous secondary tubeMTBFNot less than100000hours, other electronic components of theMTBFNot less than30000Hours

    Product features

    1 Low power consumption2 Novel structure, beautiful appearance3Large viewing angle4 Long life5 Multi-sealed, waterproof6Unique optical system with uniform color7 Visible distance8 Use of wide voltage input power supply, universal9 MeetGB-14887-2003International standards

    Installation structure

    The general assembly of road traffic lights is approximated (tunnel and toll station) two installation methods). The basic installation is detailed in the figure below:

    Lane indication signal light installation instructions

    First, the lower boom and the luminaire case,M10X20MMScrew the screw stow and then connect or weld the upper boom with the wall with expansion bolts. After installation, rotate the luminaires left and right until the desired angle is required, tightening all mounting screws. Connect the power cord, pay attention to tighten the line out of the plastic line card,To prevent rain from entering the light box.