细节展示放大镜特效

Dual-function Shoulder Flash

  • No:XH-JD-005
  • Quantity:

      Recommend

    Product Name: Dual-function Flash Shoulder Lamp

    Model: XH-JD-005

    Specification: 80*33*26mm

    Technical parameters:

    Lampshade Material: PS

    Base Shell Material: PE

    Light Source: Ultra-bright led beads

    Luminescent colours: red, blue

    Power supply: lithium battery

    Power capacity: 500 Mah

    Working voltage: 3.7V-4.2V

    Scintillation frequency: 32 times / min & plusmn; 2 times

    Working temperature: -20 +60.

    Working mode: red and blue flashing, lighting

    Control mode: key numerical control

    Charging time: 3 - 4 hours

    Circuit Protection: Over-impact, Over-discharge, Over-current, Short Circuit, Ultra-high Temperature Discharge, etc.


    Instructions:

    1. Press 3 seconds for start-up time, turn on the red-blue flash, press again, turn off the red-blue flash and turn on the lighting.

    2. Press 3 seconds long, so the working light is off.

    3. After charging, please press the switch to start once. If the shoulder lamp circuit does not work, it needs to be activated by the charging device after the shoulder lamp interface is electrically connected.

    Packaging list: 1 shoulder flash, 1 UBS charging line, 1 220V charger, 1 instruction, 1 warranty card, product certificate, etc.

    Dual function flash shoulder lamp performance:

    1. Drivers can find it 1,000 meters away. Shoulder lamp uses high brightness LED lamp to realize flash function through switch.

    2. It has the characteristics of small size, light weight, good waterproof performance (IP64), stable and reliable performance, long duration of continuous explosion and flash, and easy to carry.

    3. Law enforcement officers such as traffic police and road administration wear on the road at night, which can not only remind drivers to abide by traffic rules at a long distance, but also effectively protect the safety of policemen on duty.

    Dual-function police flash shoulder lamp uses: shoulder lamp can be clipped on the shoulder stamp of law enforcement officers. When the switch is turned on at night, the flash lamp is sent out to remind drivers to pay attention to people in the bright spot. Protect the safety of law enforcement personnel.