90 pieces of automatic stop nails for arrival
Where to sell automatic stop nails in Beijing
3. Full automatic stop nail | New automatic stop nail | Full automatic remote control stop nail
Our company provides grand fully automatic stop nails, new fully automatic stop nails, the most advanced fully automatic stop nails, Beijing spot fully automatic stop nails, sent to all parts of the country: Beijing fully automatic stop nails, Xinjiang fully automatic stop nails, Hebei fully automatic stop nails, Yunnan fully automatic stop nails, Guangzhou fully automatic stop nails. Automatic blocking nails, Tibetan fully automatic blocking nails, Sichuan fully automatic blocking nails are well received by customers: army fully automatic blocking nails, Public Security Bureau fully automatic blocking nails, court fully automatic blocking nails, procuratorate fully automatic blocking nails, providing fully automatic price of blocking nails, fully automatic blocking nails manufacturers, fully automatic blocking nails. Full automatic stop nail parameters, full automatic stop nail pictures, full automatic stop nail Beijing spot supply, looking forward to new and old customers to purchase Zhangming 18710249738 Wechat synchronization QQ2641137997 company website www.jsn110.net
Our company producesAutomatic remote control stud/Remote Control Barrier/Automatic remote control tyre breaker
At present, most of the distributions in our country areManual or semi-automatic stop pinsMost of the products were designed and manufactured before 1990's. There are some problems in the use of the products as follows: manual collection and placing, slow cloth and defense speed; too large volume and weight, inconvenient for single soldier to carry and defend; the control distance can not be controlled freely; and the cloth and defense police officers can easily cause accidents and casualties by repeatedly blocking the road surface.
New remote control automatic stop nailThe design concept is advanced, the remote control traction drive is adopted to realize the automatic collection and release; the overall weight of the equipment is less than 8 kilograms, which is easy to carry by single soldier; the operation steps are simple and the clothing and defense are fast, which greatly improves the actual effect; the clothing and control length can be chosen freely within 7 meters according to the actual needs; the remote control operation distance is up to 50 meters, which reduces the number of police officers to wear a cloth back and forth. Anti-unnecessary damage caused by road surface; the function of manual automatic integration achieves all-weather use; quick replacement of accessories, easy repair; anti-rust treatment of metal parts can prolong the service life; nails, strips, broken tires and deflation effect is better, greatly improving the blocking capacity; all performance indicators have exceeded the domestic level. The similar products have reached the international leading level and fully meet the tactical requirements of the army.
In recent years, the world's anti-terrorism situation has become increasingly serious. Terrorists use automobiles as crime tools, escape tools and weapons of destruction have become common means of crime. How can we intercept vehicles suspected of committing crimes quickly and effectively? A new topic has been put forward, so it is urgent to improve the efficiency and mobility of obstruction. At the same time, it is not easy to neglect the protection of the personal safety of police officers. Therefore, the upgrading and replacement of vehicle-blocking equipment is imperative.
Instructions:
1. The gear box wheel is lowered to the road surface - --- the traction device is in the direction of deployment - --- opening the lock on both sides - --- opening the power switch of the traction device (the red key is on standby).
2. Pull out the antenna of the remote controller - - press the forward button (upper button) and the nail will expand until the required length is released and the button will stop.
3. When closing, press the back button (down button) and loosen the button after closing. (Note: The remote control has the function of delaying and controlling the advance during operation. Otherwise, it will be damaged by strong inertia impact on the box.)
4. When receiving the box, the traction device corresponds to the interface of the nail-belt box, and then the box body is erected and the lock on both sides is pressed.
5. When laying out, please choose smooth pavement.
6. When the electromechanical fault can not be operated remotely, the nail belt can be pulled out by hand-held traction device, and the layout can be completed manually.
Notes:
Because of the sharp nails, it can avoid injuries in operation and maintenance.
There must be a special person on duty near the time-setting nail belt to avoid injuring pedestrians and vehicles by mistake.
In cloth interception, it is strictly forbidden for any person to appear within 25 meters of the inertial direction of the intercepted vehicle and nail belt. Avoid injuries caused by out of control after tyre breakage.
When equipment is idle for a long time, it needs to be charged once in 60 days or so.
The power switch should be switched off in time after use.
Artificial, malicious heavy falls and heavy collisions with equipment boxes are strictly prohibited.
This product is an electromechanical product. Please pay attention to waterproof, moisture-proof and sun-proof in use and storage.
When replacing the nails, be sure to place the O-shaped rubber ring at the top of the nail shaft (nail base), otherwise the nails will fall off easily.
3. Judgment and maintenance of general faults:
1. In case of remote control failure, please follow the following steps to check:
Check whether the power supply of the remote controller is normal (whether the battery of the remote controller needs to be replaced).
Check the power supply of equipment box is normal. Lithium batteries are normally charged once. It can be retrieved and put more than 100 times continuously or stand by for more than 100 hours continuously. If the working efficiency of equipment decreases sharply, new batteries should be replaced.
Check whether the circuit board is normal (when the power is turned on, the circuit board indicator is on)
2. If the nail strip (aluminium strip) can't be retracted properly due to its deformation, please adjust the deformed aluminium strip manually and straighten it to return to normal.
Telecontrol Automation/Hand Dual-purpose Portable Blocking Nail
Instructions for the use of products:
1. Place the stop pin on the road surface - the direction of the traction device unfolding - open the lock on both sides - open the power switch of the traction device (the red key is on standby).
Pull out the antenna of the remote controller - press the forward button (front), and the nail belt is expanded to the required length to release the button.
When receiving, press the back button (back) and press the back button to release your hands.
l notesThe circuit board has the function of delay, so it is necessary to master the advance when operating, otherwise it will be damaged by strong inertia impact on the box.
When receiving the box, the traction device should be matched with the interface of the nail-belt box. Then the box body should be erected and the lock on both sides should be pressed.
When laying out operation, please choose the flat pavement environment.
When the machine fails to operate remotely due to mechanical and electrical faults, the nail belt can be pulled out by hand-held traction device, and the layout can be completed manually.
Notes: (Please read the instructions carefully before using).
Because of the sharp nails, attention should be paid to avoid injury in operation and maintenance.
When laying and operating, special person should be on duty near the nail belt to avoid injuring pedestrians and vehicles by mistake.
In cloth interception, it is strictly forbidden for any person to appear within 30 meters of the inertia direction of the intercepted vehicle and nail belt, so as to avoid causing personal injury due to the uncontrollability of the vehicle after tire breakage.
When the equipment is idle for a long time, the right 90 needs to be charged once.
After use, the power switch should be switched off in time to avoid damage to the battery caused by excessive discharge.
Man-made, malicious heavy falls and heavy crashes of equipment boxes are strictly prohibited.
This product is not completely waterproof for mechanical and electrical products. Please pay attention to waterproof, moisture-proof and sun-proof in transportation, use and storage.
When replacing nails, be sure to put them first.OThe top of the nail shaft (nail base) is placed on the V rubber ring, otherwise the nail will fall off easily.
It is recommended that the nail belt, nail shaft and nail be maintained regularly to remove dust and oil from the nail shaft to ensure that the equipment is in good condition.
General fault diagnosis and maintenance:
1. In case of remote control failure, please follow the following steps to check:
Check whether the power supply of the remote controller is normal (whether the battery of the remote controller needs to be replaced).
Check the power supply of the equipment box is normal. The main lithium batteries can be recharged once normally, and can be retrieved and placed more than 100 times or standby for more than 100 hours continuously. If the working efficiency of the equipment is greatly reduced, the replacement of new batteries should be considered.
Check whether the circuit board is normal (when the power is turned on, whether the circuit board indicator is on).
2. If the nail strip (aluminium strip) can not be retracted properly due to its deformation, please adjust the deformed aluminium strip manually and straighten it to return to normal.
3. This product is a mechanical and electrical product. If you can't resume normal use under special circumstances, please contact the supplier according to professional skills.
4. Operators of roadblock facilities prompt troubleshooting, and non-professionals are strictly forbidden to disassemble themselves.
Product specifications and indicators:
Outer case size: 550 mm x 425 mm x 80 mm.
Equipment weight: 8 kg.
L Remote control speed: deploy within 5 seconds, 7 meters within 5 seconds, recover within 7 meters of the required length can be freely selected.
L Remote control range: 50 meters.
Nail length: 4.5mm.
L Charging Rule: The first three charges need to be charged for 12 hours each time. More than 100 consecutive receiving and placing operations and more than 100 consecutive standby hours. The charger indicates that the charge is being charged when the red light is on and the charge is completed when the green light is on.
This product is guaranteed for one year. (Damage caused by abnormal operation is not covered by warranty)
Automatic remote control stop nail24Hourly service hotlineZhang Ming 18710249738 Wechat Synchronized QQ2641137997
Beijing Hongda Kaisheng Trading Co., Ltd.companyZhang Ming 18710249738 Wechat Synchronized QQ2641137997 Address: 15 Fangzhuang South Road, Fengtai District, BeijingFang Heng Couplet Apartment 2A, Building No.1Seat 1216Company official website:[Remote control automatic stop nail Beijing Hongda Kaisheng Trading Co., Ltd. Portable remote control stop nail wholesale,Blocking nails, anti-terrorism remote control blocking nails, custom grade blocking nails, blocking nails Beijing sales company, reputation first, dedicated service!
