细节展示放大镜特效

Wheel lock

  • No:nothing
  • Quantity:

      Recommend

    Product introduction

    Product characteristics:

    1. Light and strong: the total weight of the lock body is 9.5 kg, and the total weight of the lock body is 6 kg, which is 2 mm thick steel plate fully enclosed structure.

    2. Preventing escape: If the illegal vehicle wants to start forcibly, it will puncture the tire just inside the lock body and cannot move.

    3. Arm clamping function: double adjustable arm clamping, so that the lock can be used in a wide range.

    4. Easy to operate: a person can operate independently, lock and unlock the car quickly and easily.

    5. Safety theft prevention: The anti-theft board at the rocker handle mouth is connected with the locking mechanism to prevent the illegal driver from breaking down, stealing and escaping by himself.

    6. Scope of application: (1) Various types of cars and trucks.

    (2) It is especially applicable to the departments of public security traffic police, patrol police, transportation and urban management.

    Operation:

    1. Locking steps:

    (1) Put the wheel lock next to the driver's front wheel and place it flat on the ground. The side with the wheel cover is outside the vehicle. Open the anti-theft guard plate with the key, insert the rocker handle into the rocker handle hole, shake counterclockwise, and release the clamp arm.

    (2) Clamp the wheel lock onto the locked wheel, adjust the wheel cover to cover the screw part of the tire center, tighten the tire with the inner arm, shake the handle clockwise, and clamp the tire.

    (3) Insert the rocker handle into the handle hole of the wheel cover, adjust the wheel cover to fasten the wheel, pull out the rocker handle, lock the anti-theft guard plate, and complete.

    2. Unlocking steps:

    (1) Open the anti-theft guard plate with the key, loosen the two rocker holes with the rocker handle, and loosen all the clamping arms.

    (2) Grasp the wheel lock arms with both hands and pull forcefully to the front of the vehicle, so that the wheel lock and the wheel are detached and completed.

    Tips: 1. When locking a car, the front wheel of driver's side must be locked so that the driver can see that the car has been locked, thus avoiding unnecessary trouble.