Anti-intrusion Early Warning System for Snow Paste Cylinder

Anti-intrusion Early Warning System for Snow Paste Cylinder

I. Brief description:

Traffic accident handling and intrusion prevention system is a barrier to prevent the occurrence of secondary accidents and to ensure the safety of police personnel. Our company independently developed anti-intrusion alarm equipment, the use is extremely simple. When the anti-intrusion alarm is used, only the alarm detection circle is removed from the main equipment and placed on the cone of the front end of the accident scene. When a vehicle intrudes into the accident scene, it touches the cone, the alarm detection coil sends out the wireless alarm signal, and the back-end main equipment receives the alarm signal and sends out the alarm sound, which prompts the police officers to avoid accidents in time.

II. Equipment Composition

Each set of traffic accident handling and intrusion prevention alarm equipment consists of an alarm host, eight early warning sensors, two portable alarms and chargers.

Technical characteristics:

1With rain proof and resistance3Rice falls, can-20℃～+80Long-term continuous work at C.

2Early warning sensors detect vehicle intrusion through gyroscope and wireless digital transmission technology to warn people or motor vehicles intruding into the warning area for various reasons.

3When a vehicle intrudes, it can actively carry out sound, light and vibration warning, warn people or motor vehicles to intrude illegally, and remind drivers of the scene to take prompt measures to brake the vehicle and avoid accidents.

4It can send warning signals wirelessly to trigger the sound, light and vibration handheld wireless alarm controller that every policeman wears on the scene, and trigger the wireless high-power alarm host at the same time. It reminds other field personnel who do not wear the portable alarm controller to avoid intruding into the vehicle and avoid injuries caused by intruding into the motor vehicle. Pieces.

5Outdoor use, portable alarm, wireless networking, networking scope: wireless networking (>)250One. Wireless transmission receiving and control, communication distance between two groups is no less than200Mi, can be relayed. Infinite transmission adoption433MHzIndustrial frequency band, strong anti-interference ability.

6Work mode: The alarm sensor is respectively mounted on the anti-cone bucket (the alarm host can be adsorbed on the roof) and the alarm host and the power switch of the hand-held alarm are turned on to work.LEDLuminescent warning, passive collision warning, sound control output of alarm, vibration warning.

7Early warning sensors, alarm mainframe, portable alarm devices and other equipment materials are used.ABSHigh strength material, strong and durable. At the same time, the early warning sensor uses super-strong reflective strip, which has strong warning effect at night.

8Wireless alarm range: early warning sensor (> alarm sensor)1000M; alarm host (> m)200Personal hand-held alarm (> m)200Rice.LEDLife: Not less than100,000Hours.

9Ultra-low power consumption design of alarm detection circle and continuous use time requirement: early warning sensor (> alarm sensor)10Hours, alarm mainframe (>)30Hours, alarm handheld device (>)40Hours.

10Working power supply: early warning sensor:360mAhRechargeable lithium battery; Alarm host:1200mAhRechargeable lithium battery, alarm handheld device: battery capacity1800mARechargeable lithium batteries.

11Equipment Size Requirements: Early Warning SensorsØ160mm(Diameter)x30mm(high); alarm main equipmentØ200mm(Diameter)x240mm(High): Alarm Handheld Device95mm(long)x50mm(Wide)x28mm(High).

Main Components of Traffic Accident Handling and Intrusion Prevention System