Introduction to the product
This equipment for high-brightness solar flashing lights, is the highway maintenance work around the site or in the direction of traffic flow in advance, so as to remind the driver to slow down the safety warning equipment. It is mainly composed of light panels, lampshades, solar panels and bases. With less electricity, long life, anti-aging and good warning effect and so on. The installation of dangerous areas where there are traffic safety hazards on the highway prompts drivers or pedestrians to pay attention, which can effectively serve as a warning effect to avoid traffic accidents and accidents.
Product features
This product design is reasonable, beautiful and practical, light-emitting elements using high-quality LED light source, flashing effect is good. Product configuration solar single-crystal battery panel, using aluminum-framed glass laminate, better light transmission, higher absorption of energy. The load power is a minimum of 10W, the light is brighter, pedestrians and vehicles can see more clearly, and can be light-controlled or long-lit second gear adjustment (optional) to meet the different road sections and time use. Built-in 12V/16AH deep cycle maintenance-free battery, longer use time, continuous rain 5-7 days can be used normally and effectively. The bottom sitting belt 76mm sleeve for the user to directly install the pole for use. Design overcharged circuit protection, balance current circuit stability, circuit board with environmental protection three anti-paint coating, better protection performance.
Product parameters
1. Product size: 530mm x 165mm x 135mm
Solar panel size: 290mm x 270mm (5W)
Individual lampshade size: 100mm x 110mm
2. Operating voltage: 6V
3. Battery: 5AH
4. Warning distance: 800 meters (night)
5. Light control effect: master off, light is not lit, master on, light control off, light has been on; master open, light control on, bright light is not bright, weak light; automatic control can be achieved.
6. The shell is composed of aluminum alloy profiles and the surface is galvanized. At the same time, the use of sealed structure combined lamp set, waterproof performance is good.
7. Each set of lamp board consists of 20 high-gloss LEDs, plus a vacuum-coated reflective plate, and the highlighttransparent polycarbonate lamp cover makes the lamp's night lighting visible distance of more than 800 meters.
8. How to use: Turn on the main switch and the light starts to blink normally.
Turn on the light control switch, the bright light is not bright, weak light.
(Note: If the light control function is not used, turn off the light control switch)
9. Long working on rainy days: 6 days
10.Product Weight: 7KG
11 Waterproof and dustproof: IP53
Product pictures
