Product name: remote control roadblock (deceleration block type)
Product name: remote control roadblock
Product model: LZ-D-SD1C
Date of commissioning: 2011
Product Profile:
LZ-D-SD1C portable remote control vehicle blocker roadblock is composed of high-performance reinforced plastic block and stainless steel air vent hollow needle. It adopts electromechanical remote control device. It is simple to operate, safe and reliable. It can set up cards and mobile defense at any time without affecting normal road smooth. It is indispensable for the relevant law enforcement departments to set up cards to intercept suspect vehicles. Advanced stop facilities.
Product function:
When it is used to perform tasks, obstacles are set up on the road to puncture and deflate the tyres passing through the vehicle so that they can not run normally and effectively intercept (suspected) vehicles.
Product structure:
It consists of 32 blocks of roadblock module, transmission shaft, connecting spring, stop pin, battery pack (rechargeable), connecting cable, control system (control box, remote transmitter).
Main technical indicators:
Model: LZ-D-SD1C LZ-D-SD2C (additional alarm, lighting function)
Power supply: (1) remote controller 12V
(2) Host Battery 12V 4.5AH
Remote control distance: 40m (open area)
Alarm sound level: > 120 dB
Specification: 6m-15m
Punctured tire thickness: <35mm
Load Weight: 40T
Indicative value of undervoltage: <10.5V
Standby time: 15 days
Quality: (Containing box) 36kg (8m)
Usage method:
The roadblock opens to the section that needs to be intercepted.
Connect the roadblock socket on the side of the control box with a dedicated cable and the socket on the roadblock head (for example, use an external power supply, then use another long cable to connect the truck 12V output and the external power supply socket on the side of the control box).
Open the panel power switch (after selecting the built-in or external power supply).
Pull out the receiving antenna on the controller and the transmitting antenna on the remote controller.
Press the key of the remote control, the roadblock nail is erected, the red indicator light of the control box panel is on, and the roadblock is in the state of interception alert.
At the end of the interception, press the key of the remote control, pick up the roadblock nail, and turn out the red indicator of the control panel.
Turn off the power supply, unplug all the connecting wires, roll up the roadblock and enter the box.
Matters needing attention:
When the remote control distance is obviously shortened, the remote control battery should be replaced in time.
Once the roadblock is in a state of alert waiting, special personnel should be on duty to prevent accidental injury to other vehicles and pedestrians.
No one is allowed to appear within 25 meters of the inertia direction of the intercepted vehicle in order to avoid unpredictable incidents after tire breakage.
At the end of the interception mission, hollow needles should be inspected and filled in time.
The remote control road block is avoided to be used in rain as far as possible.
This product is stored in dry and ventilated places. When it is not used for a long time, it should also be charged regularly. It is recommended that it should be charged once a month. Secondly, take out the batteries of the remote controller so as to avoid leakage corrosion of the batteries.
Implementation Standard: GA/T 421-2003 Puncture and Exhaust Road Barrier
Testing and certification: In July 2011, it passed the inspection by the Special Police Equipment Quality Supervision and Inspection Center of the Ministry of Public Security.
