Product performance and parameters
Weight: less than 7.5kg
Anti-riot armor clothing made of engineering plastic and soft energy absorption materials, front chest and back protective layer structure of 2.0mm, thick aluminum plywood layer and soft new energy materials, armor clothing protection site: front chest, double arm, double leg, protective, elbow, knee protection, protective gloves. The front guard layer structure is 2.0mm thick whole aluminum plywood. Suitable for height size: 165cm to 185cm. Protection area: front chest and front gear: .10m2. Back: .10m2. Upper limbs (with shoulders, elbows): .18m2. Lower limb (including foot back): .30m2. Flame retardant performance: After the surface of the protective component is burned. the fuel ingress time of less than 10 seconds. Structural connection strength: Fastening strength: s500N. Velcro buckle strength: s7.0N/cm, connection band strength: s2000N Anti-riot clothing using non-toxic, flame retardant materials specially made, and the use of advanced buffer ingenuity to set ventilation system, riot gear wearing practical, convenient, flexible, excellent appearance, reasonable design of the connecting structure, 2 minutes can be worn neatly, significantly better than the conventional anti-riot clothing of the various technical indicators. Anti-riot suit anti-stabbing performance: for the front chest, back, abdomen with standard test tool, 20J kinetic energy, vertical in, the tip does not pass through the protective layer. Anti-riot clothing high and low temperature impact resistance performance: the anti-riot clothing hard protective layer into the high temperature of 55 degrees C , 2 degrees C, low temperature - 20 degrees C , 2 degrees C in the thermostatic box 4h, the corresponding parts of the impact test is not damaged. Explosion-proof clothing (standard) including: front chest, double arm, double leg, arm, elbow, knee, gloves 1. Implementation standards: has passed the Ministry of Public Security special police equipment quality supervision and inspection center inspection strict inspection, the requirements meet the "GA 420-2008 police riot gear" in the basic police riot uniform requirements. 2. Inspection reports issued by the Ministry of Public Security and 1.28 million liability insurance may be provided.
