Police flashlight is a must-have item for single police equipment, and three-grade police flashlight provides high brightness lighting; front-end light switch/weak light/strong light/explosive flash/, front-end has an attack head, which can cause pain and uniform; aviation aluminum alloy material, waterproof, compression and fall resistance; lamp life 100,000 hours, brightness: 130 lumen. Continue to illuminate for more than 5 hours and recharge 1000 times.
I. Specific parameters of policeman flashlight
Name of product: Police flashlight
Light bulb: CREE 3W high power LED light bulb
Beam brightness: 110-130 lumens
Material: 6061-T6 Aerospace Grade Reinforced Aluminum Material
Surface treatment: precision CNC processing, thickened anodic oxidation treatment, dumb black
Lighting time: Continuous high brightness lighting for more than 5 hours (Note: If using sample batteries provided by our factory, the maximum time of use is not more than 180 minutes)
Shape size: 140 mm * handle 26 mm (lamp head diameter: 34 mm)
Weight: 120g (battery free)
Product Features: Attack Design, Waterproof, Compression and Fall Resistance, Intelligent and Fast Charging
Switch: middle switch. Unique point-shooting function design. When using, press the switch lamp to turn on the weak light. It is necessary to switch the light as long as the light switch can achieve tactical point-shooting. Functions in turn are: weak light, strong light, explosive flash. When the switch lamp is pressed, it will turn off.
Appearance: Precision CNC, Thickened Anodic Oxidation, Dumb Black
Lens Material: Imported High Quality UCL Double Coated Lens with Extremely Light Transmittance
Functions: Weak light, strong light and flash
Waterproof: fully sealed design, can be operated under water 1 meter, high hardness alloy shell, high and low temperature resistance, high humidity performance is good, can be used in various adverse environmental conditions.
Intelligent Charging: The charger uses chip to control charging. It has the functions of constant current, constant voltage charging, overcharge protection, short circuit protection, switching lights and anti-backfilling protection.
II. POLICE police flashlight usage method
1. Battery Installation
Turn off the tail cap, pay attention to the positive and negative poles of the battery, put the battery in and screw on the tail cap.
2. Open
When the torch is in the closed state, press the rubber cap in the middle and hear the "click bar" sound, indicating that the torch is open. Repeat the steps mentioned above to close it.
3. Point shooting
When using, press the switch light to turn on the weak light. It is necessary to switch the light so long as the light switch can achieve tactical point shooting. Functions in turn are: weak light, strong light, explosive flash. When pressing the switch light, turn off.
4. How to Charge
1. Turn off the tail cap of the torch and take out the battery.
(2) Put the battery into the special charging box (note: when putting the battery, the positive and negative electrodes of the battery must be opposite to the positive and negative electrodes of the positive and negative battery box, otherwise the battery will not be charged)
(3) Take out the charger and insert two pins into the charging interface, and the socket end into the battery box socket. When charging, the light on the charger is red. When the indicator light changes from red to green, it indicates that the charging is completed, then the battery can be taken out for use.
(Note: Battery charging time is about 8 hours)
III. Notices in the Use of PolICE Police Light Hand Light
1. Do not shoot light directly into people's eyes. Strong light will cause permanent damage to the eyes.
2. It is strictly forbidden to disassemble the lamp head, so as not to cause damage to the reflecting cup or bulb.
3. When the light bulb can not maintain high brightness, please replace the battery and charge it when illuminating, so as to avoid damage to the battery caused by overdischarge.
IV. Notices for Maintenance of PolICE Police Strong Light flashlight
1. Wipe the flashlight with a clean soft cloth after each use.
2. When the torch is contaminated with sea water or corrosive liquid, please clean it with clean water in time and dry it with a blower.
3. When the lamp head and tail cover are not screwed smoothly, please apply a little silicone grease at the interface.
4. When the torch is not in use, please take out the battery and keep it in a cool place.
