Model: FBK-10 Porcelain White
Construction: Helmet, transparent PC sunshade (2.5-3.4 mm thick)
Shell Material: PC/ABS (Alloy Resin)
Mask Feeding: Surface Strengthened PC Lens, Straight Mirror
Lens: Helmets and masks are made of polycarbonate vinegar (PC) from Bayer, Germany.
Implementation Standard: GA294-2001 "Police Riot Helmets"
Color selection: black, porcelain white, military green, camouflage, customized
Specification: Average Code
Size: 350x 280x 260mm
Quality: 1.56KG
Ministry of Public Security Standards: The left side of the main view is pasted with bold block letters in English "POLICE", with the word height of 25 and the word length of 100 (chord length); the right side is pasted with bold "police" with the word height of 35 and the word length of 100 (chord length) with silver-white reflective film. The color of the ribbon material is the same as the text. It is required to paste the ribbon according to the graphic size.
Features: Durable, impact-resistant, impact-resistant, knife-proof.
Leather neck protection, internal foam pad, eaves water seal, side hearing and ventilation holes, quick release buckle, chin up, connector.
The lenses were formed by high pressure injection moulding at one time and treated by special technology of internal atomization and external hardening. Under the condition of outdoor wearing at 120 C, no fog was produced.
The greatest difference between this and other styles of Riot Helmet lies in the following two points:
1) The neck protective layer is made of flame retardant leather on the outer layer and 3 MMPE plates on the inner layer.
2) The helmet housing is connected by a four-button with fixed direction. When an attacker tries to attack the user's neck and pull out the neck guard from the outside, the four-in-one button can provide the maximum neck protection function for the user.
Matters needing attention
1. The belt must be fastened when used.
2. Before use, please check that the waterproof rubber strip on the mask should keep a good fit with the forehead of the shell.
3. Integral strength: The helmet can withstand collision energy and penetration impact of steel cone stipulated in Article 5.8 and 5.9 of GA294-2001 "Police Riot Helmets" standard of the Ministry of Public Security. For impacts that exceed this energy, it only gives you the highest level of protection and mitigates the damage done to you. Therefore, when a major impact accident occurs, the helmet should be stopped immediately or sent to the factory for identification to confirm whether it can continue to be used.
4. Overall appearance: Helmets should not be smeared or cleaned up with corrosive solvents to avoid damaging the strength of the material.
5. The service life of the riot helmet is three years.
