Product introduction:
Special Police Equipment Package1680DNylon includes front cover plate, back cover plate and central receptacle. Hand-held belts are arranged at the upper and lower ends of the inclusion body and the middle part of the front cover plate. At least two fastening buckles are installed at the middle part of the outer side, and kettle bags are arranged on the left and right sides (specifications:24*19*1) Removable mute key bag（15.5*12.1*2The back cover plate can be rolled up and fixed on the upper part of the package body through a button. The back part of the package body is provided with a die protection backpad. The die protection backpad is equipped with a pair of shoulder straps. A walkie-talkie bag is arranged on any of the shoulder straps. When used, the back cover plate can be lowered and fixed on the back part of the package body through a zipper. The backpack is then transformed into a box, which is carried by hand straps at both ends. On the back of the bag, there is a zipper-type storage bag (with a rain-proof nylon cover, printed with Chinese Special Police and English)“SWAT”Written, nylon rain cover specifications are:57.5*39.1*1) The upper part of the inner side of the front cover plate is provided with several sleeve holes. The sleeve holes are socketed with a fixed bag. The two holes are connected by a sleeve rope on the fixed bag and fastened by fasteners. The structure of the fixed bag is stable after socketing. The internal equipment of the bag body will not be scattered. The fixed bag is made into different sizes and shapes for placing a bright flashlight.（11*15*1(telescopic stick)（10*20*1Dispersion ejector（29.5*4*2) The lower part of the inner side of the front cover plate is provided with a mesh inner bag for placing anti-cutting gloves. The lower part of the receiving chamber is separated by a cavity for placing gas mask and bullet-proof helmet, and is equipped with a helmet fixing belt. Two oblique micro-impact fixing belts are arranged in the middle of the receiving chamber, and are corresponding to the upper part of the receiving chamber. A gun head protection bag is installed at the corner, and a pistol holster is also arranged in the receiving chamber.35As well as several magazine sleeves, the magazine clips are arranged side by side in the receiving chamber; there is also a middle sandwich between the receiving chamber and the protective backing pad of the pressing die, which is used for placing combat clothes such as body armor and combat vest. When placing the magazine in the flat position, the body armor is inserted vertically without folding, and the closed zipper is pulled up as if it is worn on the body. The back plays the role of bullet-proof protection, at the same time, it is convenient to take and use (pull it), and easy to wear.