Home>Product list>Protective equipment>Bulletproof equipment and materials>Bulletproof Shield Entered by the Ministry of Public Security
细节展示放大镜特效

Bulletproof Shield Entered by the Ministry of Public Security

  • No:FDP3FS-ZH04
  • Quantity:

    1. Size: 550mm*1000mm

    2. Material: High Performance Polyethylene Fiber Weft-free Cloth

    3. Shield height: 1000mm arc width: 560mm shield thickness: 4.0mg;

    4. Size of observation window: more than 100 square centimeters, light transmittance of observation window: 75.3%;

    5. Connecting strength of grip: The connection between grip and shield body can withstand 500 N pulling force, keep for 1 minute, and grip is not loose, broken or falling off;

    6. Strength of brachial band connection: After the brachial band's lap is lapped, the connection between the brachial band and the shield body can withstand 500 N pulling force, keep for 1 minute, and the brachial band is not loosened, broken or falling off.

    7. Impact strength: Bulletproof shield can withstand the impact of 147J kinetic energy. There is no hole in the stress point of the shield after impact, and the shield breaks outside the radius of the stress point of 50mm.

    8. Anti-elasticity: The bullet-proof shield in the shooting test fires at different distances from various firearms. The test results meet the standard of GA423-2003 bullet-proof shield.

    9. Shooting test of bullet-proof shield was carried out within 5 minutes after low temperature treatment (-30 ~plusmn; 2 ~4h), and the test results met the standard. Shooting test was carried out within 5 minutes after high temperature treatment (+55 ~plusmn; 2 ~4h), and the test results met the standard.

    FDP3FS-ZH04 bullet-proof shield, passed the Quality Supervision and Inspection Center of Special Police Equipment of the Ministry of Public Security, meets the relevant requirements of the bullet-proof shield in GA423-2003, and has 4.5 million insurance policies.

    Contact information: 0523-84837878