Medical limited use protective clothing
Order No: MIGA200
Basis for Testing Medical Devices in ShanghaiGB 19082-2009Detection of Medical Disposable Protective Clothing
& Middot; High quality bi-directional stretching multi-porous membrane and non-woven composite material, internal sewing and hot sealing of external tape.
& Middot; Effective resistance to liquid chemicals penetration and100%Filtration is as small as0.01Micron particles.
& Middot; concealed cuffs, hats, trousers and waist tightness; with anti-sleeve off thumb ring and neck windshield design.
& Through a series of EU professional certification: spray liquid tight protective clothing, dry particulate protective clothing, slight splash protective clothing, radioactive particulate protective clothing, infectious media protective clothing, pesticide protective clothing, antistatic protective clothing.
EN14126:2003-Antiinfective agents |
Result |
ENGrade |
ISO 16603Antihypertensive blood/Liquid penetration |
20kPaThrough |
6level/ 6level |
ISO 16604Anti-penetration of blood-borne pathogens |
20kPaThrough |
6level/ 6level |
EN ISO 22610Wet-resistant bacterial penetration{mechanical contact} |
No penetration{Long75Minute} |
6level/ 6level |
ISO/DIS 22611Anti-bio-contaminated aerosols |
No penetration |
3level/ 3level |
ISO 22612Anti-drying microbial penetration |
No penetration |
3level/ 3level |
GB 19082-2009Medical disposable protective clothing |
Result |
|
Water resistance |
The hydrostatic pressure of key parts should not be lower than1.67kPa(17cmH2O) |
greater than30 kPa |
Surface moisture resistance |
The level of water contamination on the outside should not be lower than that on the outside.3Level requirements |
4level |
breaking strength |
The fracture strength of materials in key parts should not be less than or equal to45N |
The left and right front skirts and arms are larger than those of the left and right arms.50N |
The back is larger than100N |
||
elongation at break |
The elongation at break of materials in key parts should not be less than or equal to15% |
greater than75% |
Filtration efficiency |
The filtration efficiency of non-oily particles should be no less than or equal to that of the key materials and joints.70% |
100% |
Please identify our brand:
Wechat Subscription Number: ZBTJ888
Open up the Wechat sweep, pay attention to our Wechat Subscription Number, anytime and anywhere you can use your mobile phone to see our most complete and detailed product consultation and latest promotional activities oh!