StridePrimarily designed for wired fixed installations -- e.g.Installed on a wall, above the door, behind the reception, behind the passport control counter, above the baggage package carousel, etc.The cylinder-shaped housing is made of aluminum and has dust and moisture protection. The instrument can be equipped with3He neutron detector and decelerator, the NaI standard flasher detector with a diameter of 2x3-quot, is highly sensitive and can be detected even for small, low-activity radiation sources. The nuclide identification time is short and can be within a range of a few seconds to 20 or 30 seconds (depending on the type of nuclide, the activity of the radioactive source, the distance from the radioactive source, the background level condition, and the presence of shielded material.
StrideNetworking can be used through the network interface configuration. The interface can also be used to monitor the working status and signal output of the instrument. Stride server software (which needs to be purchased separately) automatically detects DU203.2 probes connected to the network. Depending on the Stride server configuration, DU203.2 can also be combined with other Stride detectors for higher detection sensitivity and source capability.
Product features
Rapid detection of the presence of radioactive activity or radioactive materials
Fast and accurate nuclide identification
Alarm of dose rate change above background
When using more than one detector, the radioactive source can be located
Continuous stabilization for temperature and background changes
Dust, moisture-proof
Public or private installations
High dose rate use of GM detectors