Product name: MD8-type metal detector
Model: HRS-MD8 Plus
Origin: United Kingdom
Market price: RMB 60,000
Product Introduction:
The MD8 Plus metal detector is a widely used handheld (single-man) mine detector at Quartel in the United Kingdom. The equipment uses high-frequency pulse sensing technology and is highly sensitive, making it particularly suitable for detecting trace metal mines. Since the device can be automatically adjusted to suit its environment, the operator can use the device with only a short training.
Structural features:
All components of the detector, including a controller, battery and ring assembly (except for an optional external headset), can be combined into a single device with no separate components and no inconvenient connection cables. The mine detector is fully enclosed, can be detected in the water, and has a waterproof function. It is controlled by a microprocessor with precise timing, fast conversion and strong signal processing power. Coupled with the unique probe design, the detector has a strong ability to identify small metal targets, even if the small target is close to the large target.
The detector combines general detection and microprocessor control with automatic self-identification, which allows the user to perform initialization tests, and the sound generated by the initialization test is used as the basis for the user's accurate judgment. The probe uses a hybrid Rx coil that significantly reduces interference from other targets to increase the signal/noise ratio and is more sensitive. This characteristic also inhibits targets outside the probe. Of course, since the insensitive area is adjustable, a signal can be received on the edge of the probe. The use of hybrid coils greatly improves the ability of the detector to use in traditional hazardous environments, for example, without reducing its sensitivity when detected in mineralized soil.
The middle of the probe is separated by the "observation rod". When the center of the object under test is just below the "observation bar", the audio signal is very clear to zero, allowing the center position of the target to be accurately determined with millimeter accuracy. The MD8-plus detector is powered by only two dry batteries, and its electronic slot uses an automatic power supply to provide a constant voltage for the electronics, which can be fully utilized regardless of the battery's status to keep the battery in optimal working order.
Technical parameters:
Weight: 3kg
Weight: 10kg
Probe length: 1120 mm to 1560 mm
Battery requirements: LR20 manganese dry battery.
Battery life: 12 hours of continuous operation while working with high sensitivity, 16 hours of intermittent work, 18 hours of continuous operation and 24 hours of intermittent operation when working with high sensitivity, and two flashing light-emitting diodes and sound prompts when the voltage is low.
Detection sensitivity: 0.05g stainless steel can be detected at a distance of 75mm from the probe
Job adaptation to humidity: fully enclosed and can dive into water 2 meters operation
Operating and storage temperature adaptation: -25-deg; C-70-deg; C
Probe:
The probe is 1120 mm long, the shortest is 700 mm and the weight is 1100 g. Glass resin telescopic rod with a coating on the surface to protect the environment. The probe has a diameter of 300 mm, a black ABS material, surface for EMC treatment, and a hybrid RX coil designed to improve the signal/noise ratio.
Headphones:
Danavox headphones, lightweight, weigh only 50 mg and are about 1300 mm long (including wire).
Product Name: Golden Scorpion Metal Detector
Model: HRS-JX01
Origin: China
Market price: RMB4500
Application range:
Metal detectors are mainly used to detect and identify metal objects buried in the ground, in addition to military use, it can also be used in: customs inspection and security inspection; , prospecting, archaeology; discovering gold and silver treasures and metal artifacts buried underground; recycling of scrap metal;
Technical parameters:
| Technical parameters Technical parameters |
|
| Signal frequency |
9.6KHz |
| Audio frequency |
400Hz |
| Operating voltage |
DC12V (built-in rechargeable battery) |
| Power consumption |
0.8W |
| Link length |
0.8-1.3M |
| Net weight |
3.2KG |
| Total weight |
3.5KG |
| Depth |
0-3.5 m (plant label: 60 x 60 x 1CM aluminum plate) |