RJ-MK4 Row Blasting Hook Tool Group

MK4Detonation rope hook Toolkit

1. Detonation toolkit, Detonation rope hook Toolkit

2. Detonation rope hook Toolkit-Price of Detonation Rope Hook Tool Group

The company provides the grand MK4 detonation rope hook toolkit, the new MK4 detonation rope hook toolkit, the most advanced MK4 detonation rope hook toolkit, Beijing spot MK4 detonation rope hook toolkit, sent to all parts of the country: Beijing MK4 detonation rope hook toolkit, Xinjiang MK4 detonation rope hook toolkit, Hebei MK4 detonation rope hook toolkit, Yunnan MK4 detonation rope. Hook Tool Group, Guangzhou MK4 Row Explosive Hook Tool Group, Tibet MK4 Row Explosive Hook Tool Group, Sichuan MK4 Row Explosive Hook Tool Group are well received by customers: Force MK4 Row Explosive Hook Tool Group, Public Security Bureau MK4 Row Explosive Hook Tool Group, Court MK4 Row Explosive Hook Tool Group, Procuratorate MK4 Row Explosive Hook Tool Group, providing MK4 Row Explosive Hook Tool Group. Tool Group Price, MK4 Row Explosive Rope Hook Tool Group Manufacturer, MK4 Row Explosive Rope Hook Tool Group Parameters, MK4 Row Explosive Rope Hook Tool Group Pictures, MK4 Row Explosive Rope Hook Tool Group Beijing Spot Supply, looking forward to new and old customers to purchase Zhangming 18710249738 Weixin Synchronized QQQ2641137997 company website www.jsn110.net

Place of Origin:China

Model:RJ-MK4

I. Product Description:

The rope hook group is the most ideal disposal equipment for detonators when disposing of explosives. It avoids the direct contact between the detonator and the explosive suspicious substance, transfers and identifies the explosive suspicious substance through long-distance operation, thus effectively guarantees the safety of the detonator. Rope hook tool set: equipped with various ropes, pulleys, fixtures, fixtures,SuckerThe expansion rod, cat hook and other tools can be assembled and used together.

II. Major components include

1、 Main rope tray:

Φ5*120The main rope of meter is wound around the coil, and the end of the rope is equipped with a detachable stainless steel spring hook. The wire disc is equipped with a rocker handle, which rotates the wire disc by hand when the wire is closed. After the wire is closed, the rocker handle can be removed and inserted into the plastic card sleeve beside the handle.

2、 Nylon rope with sleeve (white)

Nylon ropes are made of polypropylene filaments with Phi at both ends.70Soft rope sheath, rope buckle with fork knitting is not easy to open. When the binding object is tightened by rope, it can be pulled by main rope and fixed pulley.

Technical specifications:

Diameter: Phi5

3Wire rope with sleeve.

Wire rope is made of multi-strand galvanized steel wire with two ends of phi.10Riveted by stainless steel sleeve. When binding an object, it can be tightened by a rope sling. The hook should be hung on the rope sling with a retaining ring.

4. Rope.

The groove of the rope grabber is composed of two conodont plates. The method of using the groove is shown in the right figure. Use this tool to avoid slippage by pulling the rope directly when releasing rope and pulling suspected explosives.

5Hook

The hook is made of stainless steel, non-ferromagnetic, rectangular cross-section, and has two shapes: single hook and double hook. The outer surface is sprayed with yellow plastic.

6Vigorous forceps

The forceps are made of steel plate. The adjusting screw end is equipped with a suspension ring. The size of the forceps is adjustable. According to the size of the clamp, the size of the clamp should be adjusted beforehand, and the right screw clamp should be smaller, but not less than <170mm, Otherwise, the clamping function will fail. The clamp can be locked after clamping the object. The clamp can be pulled by a rope pulley and a hook.

Technical Data:

Maximum size of clamp:38mm Clamp length:245mm

Minimum size of clamp:17mm Weight:450g

7. Sheep's eyelids

Ring with ring25mmLong wood screw, can be fixed on wooden objects by hand as a fixed point, the number of eye sockets installed on wooden objects depends on the size of the force, the force is large and can be installed.2~3One.

8.Rings

Rings made of stainless steel, connecting threadsM10The surface of the hook is sprayed with plastic and connected with the stainless steel hook, which can make the hook become a hook with a hanger ring.

9Suspension belt

The suspension strap is made of the suspension strap and the suspension strap is made of the suspension strap and the suspension strap, the suspension strap and the suspension strap.80*2Nylon braided tape and nylon rope.

This sling is suitable for binding packages and cylindrical objects. The belt is tied in the same way. The main rope is hooked with nylon rope sheath before lifting.

Technical information:

bandwidth=80mm Tape length=1200mm Belt weight=200g

Maximum load:100kg

The diameter of the binding object is less than or equal to Phi350mm

10Unbuckle

The rings are made of stainless steel. There is a pin at one end.M5Threads can be unloaded after loosening and become open hooks. The suspension ring can be matched with two fixed pulleys and clamping devices in this set of explosion disposal devices. Especially when the pulley can not be directly suspended, it is possible to use this suspension ring to make a transition connection.

Technical information:

width=12mm throat=12.5mm Perforable aperture greater than or equal to6.5mm Maximum load <35kg

11Wedge nails

Wedge nails are made of chromium alloy steel and have high strength and toughness. They are divided into two types: single hanging hole and double hanging hole.90Degree.

Wedge nails can be wedged into wall joints and other civil materials and become fixed points or stakes in open areas, such as parking lots.

Technical information:

1. Wedge nails should be wedged into solid and loose parts.

2. Wedge nails have ferromagnetism.

12Support rod

A transverse bar with adjustable distance is supported between doors or windows. There are two hanging holes on the pole to hang pulleys or ropes. There are spring pins and micro-distance adjusting screw on the pole. Each end of the pole has a nylon foot. Whether to use the foot depends on the material and roughness of the door frame or window frame. The foot can be used at both ends of the cement wall or brick wall and the surface of the flat pole. If the wall is uneven or the wooden structure does not need to support, the needle bar at the end of the pole is directly inserted into the wall. The length of the three needle bars at the left end of the pole can be adjusted by using the size of the moving body.3mmThe inner hexagonal wrench is inserted into the screw hole, and the inner hexagonal hole of the pin rod can be rotated accurately.

Push the pin down with the outer ring of the casing of the rod in one hand, and pull the adjusting rod of the inner tube in the other hand. The length of the adjusting rod is slightly less than the width of the door frame or window and place it horizontally. Left-turn the adjusting screw gradually lengthens the supporting rod until the cushion is flat with the frame surface, and then the left-turn screw tightens the horizontal rod again. When the cross bar is tightened, it is more labor-saving to rotate through the screw hole with the handle rod.

Technical information:

Minimum size of pole:705mm

Maximum size of pole:1150mm

Stepless adjustment length range:745~1180mm

Weight:1.5kg

Bearing capacity: span < span900mmTime less than20kg

13Slider clamp

A slider is equipped with two movable arms, one on each arm.TType screw can adjust the angle between arm and cross bar, right-handedTThe type screw can make the two clamping arms close together to clamp the clamping object and turn left.TThe type I screw can release both arms and take off the clamping device. There are three Phi on the sliding bar8Holes are used for loading and unloading lifting rings or pulleys. End of clamp armM6The screw hole can be fitted with three kinds of chucks (circular plane chucks,LType clamp block,VThe use of these three types of clamps depends on the surface state of the clamped main body. If large plane can be used with plane clamp, narrow plane or window frameLType clamp for cylindrical surfaceVShape clamp block.

Technical information:

Arm opening size:200mm

Arm depth:130mm

14Removable pulleys

The detachable pulley is composed of a hook, a wheel frame, a pulley, elastic beads and a splint. The pulley is matched with spherical clips and ropes.

It is especially necessary to use this pulley when it takes many turns to drag suspicious explosives from concealed ground to open ground. The pulley should be set at the turning point of the transportation route, such as doorway, window, etc. At this time, the suspension point is made with the support rod. Before pulling suspicious explosives, the ball clip is installed on the front rope of the first pulley (the pulley nearest to the explosive), and when the clip is running to the pulley (at this time, the suspicious explosives are also pulled under the pulley) it meets the splint and squeezes it out, then the rope breaks off the pulley and continues. Towing, the second pulley becomes the main pulley. Continue to transfer suspected explosives until they reach their destination.

Technical information:

Shape size: (length * width * thickness)210mm*75mm*40mm

Pulley diameter: Phi50mm

Applicable rope diameter: Phi4~φ10mm

Lifting weight:35kg

Weight:700g

15.Fixed pulley with latch

The pulley with a latch consists of a hook, a roller, a wheel frame and a latch. Pulleys and latches (conodonts) are made of nylon.6The wheel frame is made of hard aluminium plate. When used, the roller splint is staggered to expose the lock, then the tooth plate is moved to make the clearance between the wheel and the roller larger. Then the main rope is hung into the groove, the tooth plate is reset, the wheel plate is restored to its original state and locked with the spring pin. When lifting, the forward traction main rope is free of obstruction, and when lifting to 1. When the traction rope stops at a fixed height, it will brake itself by pulling the rope backwards by the weight of the lifting body.

16Main lock

At some turning points in the process of eliminating suspicious explosives, it is not easy to hang pulleys with braces (such as corners or near large areas of walls). Wedge nails are wedged into the wall to hang the main lock on the wedge nail hole. The main lock can be directly penetrated into the nylon rope as a fixed pulley. The smooth outer surface will not produce any effect on the rope. Excessive wear and tear.

Before hanging the main lock, press the spring lever by hand. When the main lock is notched, it is hung into the wedge pin hole, and then the main lock is locked.

17. Connecting rod

There are two kinds of connecting rods. One is that the end of the connecting rod is equipped with two fixing pins. It is the middleware connecting the anti-detachment hook and the long lap rod. The other is the middleware with a long slot. It is the middleware connecting the anchor hook and the long rod.

Technical data:

Connecting screw hole:M10

Outer dimensions: Phi13*80(with long grooves) φ12*60(with double pins)

18. On-line chuck

The aluminium hook head screw is mounted on the square with wire groove. Adjusting the nut on the hook head screw can clamp the block on any part of the rope. Hook head screw end has Phi16The ring can be used to tie ropes or hang pulleys.

19Spherical clips

The spherical clip is made of aluminium alloy. The two semi-circular clips are connected by screw. The gap of the left-hand clip is enlarged. The nylon rope is put into the slot inside the clip, and then the rope is clamped by the right-hand clip. This piece can be used in conjunction with the detachable fixed pulley. When the chuck runs to the fixed pulley, the splint of the strippable pulley will be squeezed, and the rope will fall off naturally.

20. Viscous fixing plate

The viscous fixing plate is made of a thickness of 0.2mmThe rigid aluminium plate is made of square shape, with a round hole on the back and sticking with dry glue. The fixed plate can be pasted on a flat, clean and non-porous surface at will. Such as walls, ceilings, doors, cabinets, desktops and so on. On board Phi15mmThe hole is used as a series of materials, and a sticker board can be used as a fixed point.

Technical data:

Viscous area:90mm*90mm-30mm*30mm

Weight:15g

Ideally fixed, loaded5kg

21. Vacuum chuck

The main body is made of cast aluminium alloy, and the cross beam has pHi in the center.16Hanging rings, yes.2Phi115mmRubber suction pad, center distance is200Millimeter.

Vacuum suckers must be adsorbed on smooth, flat and impermeable surfaces, such as building doors, glass, furniture, filing cabinets, doors and windows of vehicles, etc. Before adsorption, the lever on each sucker is lifted, the disk is placed flat on the main body of adsorption, and the main body can be absorbed by lowering the lever. Each sucker can be used as a point of focus or fixed point.

Technical data:

Sucker diameter: Phi115mm

Number of suckers:2

Ring aperture: circular Phi16mm

Outer dimensions: length * width * height:400mm*115mm*110mm

Weight:1.1Kg

22Dustpan

When suspicious fragments are found at the detonation site, they can be put into the dustpan and towed to the destination by hook rope and pulley facilities.

Before using the dustpan, first connect the relevant parts with nylon buckle, and then fold the shape of dustpan to hook the main rope to the buckle. After using, uncover the nylon buckle and fold it into a flat plate and put it in the box.

Technical data:

Internal dimensions: length * width * height 580mm*310mm*160mm

23. Anti-detachment hook

Anti-detachment hook is a kind of hook with locking spring. It is suitable for flexible packaging such as suspicious explosive package. The hook can not be decoupled as long as the hooked object is closed by the locking spring. There is a ring on the hook, and the main rope hook can be hooked here beforehand.

Technical data:

Outer dimensions: hooks135mm*80mm*12mm， Small hook110mm*80mm*12mm。

Drag weight50kgLifting weight35kg

heavy Quantity: hook50g , Small hook30g

24. Anchor hook

Anchor hook is divided into two parts2Species, three hooks and five hooks, hooks with barbs, but anchored target can not be detached. The anchor hook is equipped with a ring, where the main rope is hung before the anchor target, and then the hook is placed in the long groove of the front connecting rod of the lap bar to deliver the anchor hook to the target.,Remove the hitch rod after hooking the object. The anchor hook with the main rope can be thrown directly to the target without using the overhanging rod, so it is more convenient to use the five-hook anchor hook.

Technical data:

Outer dimensions: hook Phi65*60 Small hook Phi38*50

Tow weight: hook5kgSmall hook 3kg　

Beijing Dongfang Qiangsheng Technology Co., Ltd.

Zhang Ming 18710249738 Wechat Synchronized QQ2641137997