New EOD9 Detonation Suit

technical requirement

1Helmets

With the latest helmet material, it is more robust.V50Speed exceeded1600rice/second

mask

The wide mask can provide enough field of vision for the detonators, at the same time, it can be lifted or unloaded quickly, which is more convenient.

The contact part between the mask and the helmet has a rubber buffer layer, and the rubber shock absorption shaft is used at the rotating shaft of the mask, which greatly reduces the damage of the shock wave.

The combination of the mask and the helmet is sealed to prevent liquid from flowing into the helmet.

Headlamp

The helmet is equipped with two headlights, high brightness light emitting diodes, light weight, high brightness, and power saving.

Antifogging film

The anti-fog film made of special materials can effectively prevent the formation of fog. The anti-fog film can also be attached to the outside of the mask to prevent scratches. It is also equipped with an electric fog removal film to actively defog the mask in extreme environments.

ventilation system

With built-in double ventilation duct, the air flow is uniform, the noise is small and the flow rate is large.

The head and rear are equipped with double fans, which can provide quick ventilation.

Intelligent Communication System

Built-in microphone system, the volume can be adjusted by the detonator.

The helmet is equipped with two microphones and a telephone, which can control the volume intelligently. When the sound produced by the explosion is too strong, it automatically cuts off the channel and protects the ear.

Cable connection

Plug-in and pull-out fast plug, vertical setting, not only easy to install, but also meet the requirements of quick release.

Fixed method and gasket

Helmets are fixed in a four-point way, which is convenient to fix. The jaw is fixed in a detachable way. It is soft and comfortable. It is also flexible and equipped with adjustable pads. It can be applied to various users'head sizes.

Integral (shape) design

It adopts modern design, conforms to human body structure, has strong function, good flexibility and high protection ability.

Power supply

The power supply consists of a main power supply (in the pocket) and an auxiliary power supply. The auxiliary power supply is at the rear of the helmet, and is composed of a main power supply (in the pocket) and an auxiliary power supply.8only5Composition of No. 1 battery; auxiliary power supply can work independently with extended operation time.5hour20Minutes, extra long hours. If working hours are available in conjunction with the main controller8hour50Minute.

Wrist Controller

An independent controller is designed, which can be tied to the wrist. The controller includes the functions of air volume, volume adjustment, power display, headlamp switch, rapid ventilation, etc. It is easy to observe, use and operate by detonators.

2Top

Overall design

Jacket design makes it convenient and flexible for wearers to move.

In the lapping part of clothes, nylon buckles with different bright colors are used to make the wearer easily identify and improve the efficiency.

Increased groin protection components to ensure overall protection but without loss of flexibility

Quick Release Design

The design is exquisite, meticulous and considerate. It can take off quickly from the helmet to the trousers. The jacket jacket is lapped with nylon buckle. It is easy to wear and take off. The specially designed handle makes the jacket take off at the same time.2Complete in seconds, complete suit detachment does not exceed7second

360Degree protection

According to the actual needs, the latest design should be strengthened.360Degree protection, make the detonator as safe in complex environment

sleeve

Designed as splicing type, the detonator can adjust according to the condition of his arm to achieve the best flexibility and comfort.

The cuffs are designed to be horseshoe-shaped and the protective area is enlarged.

In addition, the cuff is equipped with a reinforcing fixing band to prevent energy invasion and protect upper limbs.

Front guard plate

The latest integral protection design does not require the traditional troublesome work of inserting and pulling out the guard plate.

The guard plate is closely connected with the body and can move freely; the abdominal guard plate can naturally retract when squatting, greatly improving the flexibility of action;

With the latest composite protective plate, it is light in weight and has high protective capability. It does not need to use reinforced plug board like the old explosion-proof clothing.VoSpeed up to1800rice/second

3Pants

Protection capability

It adopts advanced modular hard protection, which is divided into thighs and legs according to the shape of human body structure.4The upper end of the lower leg module is erected when squatting, which can form the protection of the knee joint. Compared with soft protection, hard protection has lighter weight, but higher protection capability, such asV50Speed exceeded750rice/second

Vertebral Protector

The spine protector manufactured according to the principle of bionics can effectively prevent the harm to the spine and reduce casualties, while maintaining the original flexibility and comfort.

Electrostatic Elimination Device

The clothes are not only made of electrostatic fiber mixture, but also equipped with a special electrostatic eliminator to connect with shoes with conductive rubber. It can effectively avoid the false detonation caused by static electricity.

Foot design

In order to fit the biochemical suit, the shoe cover is designed to be detachable.

Hand protection

Carefully designed hand protection, consisting of soft Kevlar protective plate and sheepskin gloves with nylon buckles, not only can effectively protect the hand, but also fully maintain the flexibility of the hand.