MK4 Row Bursting Hook Tool Group

MK4Detonation rope hook Toolkit

1. Detonation toolkit, Detonation rope hook Toolkit

2. Price of Detonation Rope Hook Tool Group-Detonation Rope Hook Tool Group

The company provides the grand MK4 detonation rope hook toolkit, the new MK4 detonation rope hook toolkit, the most advanced MK4 detonation rope hook toolkit, Beijing spot MK4 detonation rope hook toolkit, sent to all parts of the country: Beijing MK4 detonation rope hook toolkit, Xinjiang MK4 detonation rope hook toolkit, Hebei MK4 detonation rope hook toolkit, Yunnan MK4 detonation rope. Hook Tool Group, Guangzhou MK4 Row Explosive Hook Tool Group, Tibet MK4 Row Explosive Hook Tool Group, Sichuan MK4 Row Explosive Hook Tool Group are well received by customers: Force MK4 Row Explosive Hook Tool Group, Public Security Bureau MK4 Row Explosive Hook Tool Group, Court MK4 Row Explosive Hook Tool Group, Procuratorate MK4 Row Explosive Hook Tool Group, providing MK4 Row Explosive Hook Tool Group. Tool Group Price, MK4 Row Explosive Rope Hook Tool Group Manufacturer, MK4 Row Explosive Rope Hook Tool Group Parameters, MK4 Row Explosive Rope Hook Tool Group Pictures, MK4 Row Explosive Rope Hook Tool Group Beijing Spot Supply, looking forward to new and old customers to purchase 18600388661 Mr. Bai (Weixin No.), QQ: 753826646

Company website www.jsn110.net

Place of Origin:China

Model:RJ-MK4

I. Product Description:

The rope hook group is the most ideal disposal equipment for detonators when disposing of explosives. It avoids the direct contact between the detonator and the explosive suspicious substance, transfers and identifies the explosive suspicious substance through long-distance operation, thus effectively guarantees the safety of the detonator. Rope hook tool set: equipped with various ropes, pulleys, fixtures, fixtures,SuckerThe expansion rod, cat hook and other tools can be assembled and used together.

II. Major components include

1、 Main rope tray:

The main rope of 5*120 meters is wound around the coil, and the end of the rope is equipped with a detachable stainless steel spring hook. The wire disc is equipped with a rocker handle, which rotates the wire disc by hand when the wire is closed. After the wire is closed, the rocker handle can be removed and inserted into the plastic card sleeve beside the handle.

2、 Nylon rope with sleeve (white)

Nylon rope is made of polypropylene filament. There are 70 soft rope sheaths at both ends. The rope buckle is knitted by fork and is not easy to open. When the binding object is tightened by rope, it can be pulled by main rope and fixed pulley.

Technical specifications:

Diameter: Phi 5

3Wire rope with sleeve.

The steel wire rope is made of multiple galvanized steel wires. There are 10 rope sleeves at both ends, and the rope fastening is riveted by stainless steel sleeve. When binding an object, it can be tightened by a rope sling. The hook should be hung on the rope sling with a retaining ring.

4. Rope.

The groove of the rope grabber is composed of two conodont plates. The method of using the groove is shown in the right figure. Use this tool to avoid slippage by pulling the rope directly when releasing rope and pulling suspected explosives.

5Hook

The hook is made of stainless steel, non-ferromagnetic, rectangular cross-section, and has two shapes: single hook and double hook. The outer surface is sprayed with yellow plastic.

6Vigorous forceps

The forceps are made of steel plate. The adjusting screw end is equipped with a suspension ring. The size of the forceps is adjustable. According to the size of the clamp, the size of the clamp should be adjusted beforehand, and the right screw clamp should be smaller, but not less than 170mm, otherwise the clamping function will fail. The clamp can be locked after clamping the object. The clamp can be pulled by a rope pulley and a hook.

Technical Data:

Maximum size of clamp: 38mm clamp length: 245mm

Minimum size of clamp: 17mm weight: 450g

7. Sheep's eyelids

The circle with 25mm long wood screw can be fixed on the wooden object by hand as a fixed point. The number of eye sockets installed on the wooden object depends on the size of the force. The force can be loaded 2 to 3 times.

8.Rings

The suspension ring made of stainless steel, connecting thread M10, surface spraying, and connecting with the stainless steel hook, can make the hook become a hook with a suspension ring.

9Suspension belt

The sling consists of 80*2 nylon braided belt and polyamide rope.

This sling is suitable for binding packages and cylindrical objects. The belt is tied in the same way. The main rope is hooked with nylon rope sheath before lifting.

Technical information:

Bandwidth = 80mm bandwidth = 1200mm bandwidth = 200g

Maximum load: 100kg

The diameter of the binding object is less than 350mm

10Unbuckle

The rings are made of stainless steel. There are M5 threads at one end of the pin, which can be removed after loosening and become an open hook. The suspension ring can be matched with two fixed pulleys and clamping devices in this set of explosion disposal devices. Especially when the pulley can not be directly suspended, it is possible to use this suspension ring to make a transition connection.

Technical information:

Width = 12mm throat = 12.5mm penetrable aperture (> 6.5mm maximum load (< 35kg)

11Wedge nails

Wedge nails are made of chromium alloy steel with high strength and toughness. They are divided into two types: single hanging hole and double hanging hole. The two hanging holes form 90 degrees each other.

Wedge nails can be wedged into wall joints and other civil materials and become fixed points or stakes in open areas, such as parking lots.

Technical information:

1. Wedge nails should be wedged into solid and loose parts.

2. Wedge nails have ferromagnetism.

12Support rod

A transverse bar with adjustable distance is supported between doors or windows. There are two hanging holes on the pole to hang pulleys or ropes. There are spring pins and micro-distance adjusting screw on the pole. Each end of the pole has a nylon foot. Whether to use the foot depends on the material and roughness of the door frame or window frame. The foot can be used at both ends of the cement wall or brick wall and the surface of the flat pole. If the wall is uneven or the wooden structure does not need to support, the needle bar at the end of the pole is directly inserted into the wall. The length of the three needle bars at the left end of the pole can be adjusted. The adjustment method is to extend the inner hexagonal wrench with the size of the moving body into the screw hole and find the inner hexagonal hole of the needle bar to rotate.

Push the pin down with the outer ring of the casing of the rod in one hand, and pull the adjusting rod of the inner tube in the other hand. The length of the adjusting rod is slightly less than the width of the door frame or window and place it horizontally. Left-turn the adjusting screw gradually lengthens the supporting rod until the cushion is flat with the frame surface, and then the left-turn screw tightens the horizontal rod again. When the cross bar is tightened, it is more labor-saving to rotate through the screw hole with the handle rod.

Technical information:

Minimum size of pole: 705mm

Maximum size of pole: 1150mm

Stepless adjustment length range: 745-1180 mm

Weight: 1.5kg

Bearing capacity: span < 900mm < 20kg

13Slider clamp

A sliding rod is equipped with two movable clamping arms. Each clamping arm has a T-type screw which can adjust the angle between the arm and the cross bar. The right-handed T-type screw can make the two clamping arms close together and clamp the clamping object. The left-handed T-type screw can loosen the clamping device of both arms. There are three_8 holes in the sliding rod for loading and unloading lifting rings or pulleys. The M6 screw hole at the end of the clamp arm can be installed with three kinds of chucks (circular plane chucks, L-type chucks and V-type chucks), depending on the surface state of the clamped main body. If the large plane can be used plane clamp, narrow or window frame with L-shaped clamp, cylindrical surface with V-shaped clamp.

Technical information:

Arm opening size: 200 mm

Arm depth: 130mm

14Removable pulleys

The detachable pulley is composed of a hook, a wheel frame, a pulley, elastic beads and a splint. The pulley is matched with spherical clips and ropes.

It is especially necessary to use this pulley when it takes many turns to drag suspicious explosives from concealed ground to open ground. The pulley should be set at the turning point of the transportation route, such as doorway, window, etc. At this time, the suspension point is made with the support rod. Before pulling suspicious explosives, the ball clip is installed on the front rope of the first pulley (the pulley nearest to the explosive), and when the clip is running to the pulley (at this time, the suspicious explosives are also pulled under the pulley) it meets the splint and squeezes it out, then the rope breaks off the pulley and continues. Towing, the second pulley becomes the main pulley. Continue to transfer suspected explosives until they reach their destination.

Technical information:

Shape size: (length * width * thickness) 210 mm * 75 mm * 40 mm

Pulley diameter: _50mm

Applicable rope diameter: 4~10 mm

Lifting weight: 35kg

Weight: 700g

15.Fixed pulley with latch

The pulley with a latch consists of a hook, a roller, a wheel frame and a latch. The pulley and the locking device (conodont plate) are made of nylon 6 and the wheel frame is made of hard aluminium plate. When used, the roller splint is staggered to expose the locking device, then the conodont plate is moved to make the clearance between the pulley and the roller larger. Then the main rope is hung into the groove of the wheel, the conodont plate is reset, the wheel plate is restored to its original state and locked with a spring pin. There is no obstruction to the main towing rope. When the lifting stops at a certain height, the towing rope brakes itself by pulling the rope backwards by the weight of the lifting object.

16Main lock

At some turning points in the process of eliminating suspicious explosives, it is not easy to hang pulleys with braces (such as corners or near large areas of walls). Wedge nails are wedged into the wall to hang the main lock on the wedge nail hole. The main lock can be directly penetrated into the nylon rope as a fixed pulley. The smooth outer surface will not produce any effect on the rope. Excessive wear and tear.

Before hanging the main lock, press the spring lever by hand. When the main lock is notched, it is hung into the wedge pin hole, and then the main lock is locked.

17. Connecting rod

There are two kinds of connecting rods. One is that the end of the connecting rod is equipped with two fixing pins. It is the middleware connecting the anti-detachment hook and the long lap rod. The other is the middleware with a long slot. It is the middleware connecting the anchor hook and the long rod.

Technical data:

Connection Screw Hole: M10

Outside dimensions: 13*80 (with long grooves) 12*60 (with double positioning pins)

18. On-line chuck

The aluminium hook head screw is mounted on the square with wire groove. Adjusting the nut on the hook head screw can clamp the block on any part of the rope. The hook head screw end has a 16 ring which can be used to tie a rope or hang a pulley.

19Spherical clips

The spherical clip is made of aluminium alloy. The two semi-circular clips are connected by screw. The gap of the left-hand clip is enlarged. The nylon rope is put into the slot inside the clip, and then the rope is clamped by the right-hand clip. This piece can be used in conjunction with the detachable fixed pulley. When the chuck runs to the fixed pulley, the splint of the strippable pulley will be squeezed, and the rope will fall off naturally.

20. Viscous fixing plate

Viscous fixing plate is made of 2 mm thick hard aluminium plate. It is square in shape. There is a round hole on the back which is pasted with dry glue. It can be pasted on a flat, clean and non-porous surface at will. Such as walls, ceilings, doors, cabinets, desktops and so on. The hole of 15 mm on the board is used as a system, and a sticker board can be used as a fixed point.

Technical data:

Viscous area: 90mm*90mm-30mm*30mm

Weight: 15g

Fixed in ideal condition with load of 5 kg

21. Vacuum chuck

The main body is made of cast aluminium alloy. There are two rubber suction pads of 115mm in the center of the beam. The center distance is 200 mm.

Vacuum suckers must be adsorbed on smooth, flat and impermeable surfaces, such as building doors, glass, furniture, filing cabinets, doors and windows of vehicles, etc. Before adsorption, the lever on each sucker is lifted, the disk is placed flat on the main body of adsorption, and the main body can be absorbed by lowering the lever. Each sucker can be used as a point of focus or fixed point.

Technical data:

Diameter of sucker: 115mm

Number of suckers: 2

Sling Ring Aperture: Circular Diameter 16 mm

Outer Size: Length * Width * Height: 400mm * 115mm * 110mm

Weight: 1.1Kg

22Dustpan

When suspicious fragments are found at the detonation site, they can be put into the dustpan and towed to the destination by hook rope and pulley facilities.

Before using the dustpan, first connect the relevant parts with nylon buckle, and then fold the shape of dustpan to hook the main rope to the buckle. After using, uncover the nylon buckle and fold it into a flat plate and put it in the box.

Technical data:

Internal dimensions: length * width * height 580mm * 310mm * 160mm

23. Anti-detachment hook

Anti-detachment hook is a kind of hook with locking spring. It is suitable for flexible packaging such as suspicious explosive package. The hook can not be decoupled as long as the hooked object is closed by the locking spring. There is a ring on the hook, and the main rope hook can be hooked here beforehand.

Technical data:

Outer dimensions: big hook 135 mm * 80 mm * 12 mm, small hook 110 mm * 80 mm * 12 mm.

Dragging weight 50 kg, lifting weight 35 kg

Weight: Big hook 50g, small hook 30g

24. Anchor hook

There are two kinds of anchor hooks, three hooks and five hooks. The hooks have barbs, but the anchor target can not be detached. The anchor hook is equipped with a ring. The main rope is hung here before the anchor target object. Then the hook is placed in the long groove of the front connecting rod of the lap rod to deliver the anchor hook to the target, and the lap rod is withdrawn after hooking the object. The anchor hook with the main rope can be thrown directly to the target without using the overhanging rod, so it is more convenient to use the five-hook anchor hook.

Technical data:

Outer Size: Big hook 65 60 Small hook 38 50

Tow weight: 5 kg for big hook and 3 kg for small hook

Beijing Dongfang Qiangsheng Technology Co., Ltd.

Mr. Bai (Weixin No.), 18600388661, QQ: 753826646