细节展示放大镜特效

Bus occupant capture system

  • No:SDTA-1C
  • Quantity:
    Product Name: Handheld Metal Detector
    Product name: handheld metal detector
    Product model: SDTA-1C
    Date of commissioning: 2012
    Product Profile:
    SDTA-1C handheld metal detector has the characteristics of high sensitivity, loud alarm, small size and light weight. It can respond quickly to hidden weapons, detonators and micro-metal products in objects such as human body, package, luggage, carton and so on. It is suitable for use in airports, stations, wharfs, customs and public security departments or places. 。
    Product function:
    Direct detection and alarm of hidden or exceeding metal objects.
    Product structure:
    It consists of a probe head, a handle, an alarm, a battery pack and a charger.
    Main technical indicators:
    Detection range: pin 10-30 mm, 64 pistol 120 mm, dagger 130mm;
    Alarm mode: vibration, alarm sound;
    Alarm sound level: > 75dB;
    Continuous working hours: 40 hours;
    Under-voltage prompting function: Yes;
    Radiation magnetic induction intensity: <20uT;
    Motion speed: 0.4m/s~1.5m/s;
    Whole machine quality: 0.4KG
    Usage method:
    Installation of Battery: Slide down the battery cover, install the battery into the battery tank according to the +/-sign, push on/off switch key, turn on the green light, the detector can be used, by adjusting the sensitive regulator until the red light is on, to achieve the corresponding sensitivity and detection depth, adjust the sensitive regulator counterclockwise, until the red light is off, sound Stop, the detector has reached the best sensitivity and detection depth. Hold the detector, the probe head is facing the ground, and the detector swings back and forth at the altitude of 10 - 30 cm from the ground for detection. When the red light is on and the alarm is heard, that is to say, the metal is detected. If it is put where the metal is detected, the detection signal will be automatically weakened. Therefore, it is very important to oscillate the detector back and forth during detection.
    Matters needing attention:
    If the green light goes out completely or makes a different sound, it means that the battery is not enough, and it needs to be filled or replaced by other batteries before it can be used.
    If the detector is not used for a long time, remove the battery to prevent leakage.
    The detector is stored in a dry and warm environment.
    Implementation Standard: GB 12899-2003 Handheld Metal Detector
    Inspection and certification: In October 2012, it passed the inspection of National Safety Prevention and Alarm System Product Quality Supervision and Inspection Center (Beijing).
    In October 2012, it passed the inspection by the Security and Police Electronic Product Quality Inspection Center of the Ministry of Public Security.