I. Scope
This standard specifies the technical requirements and test methods of the directional UAV jamming interceptor (hereinafter referred to as the interceptor).
This standard is suitable for directional UAV jamming interceptor products.
TwoProduct description
This jammer is a directional gun jammer. It mainly controls the UAV or flight model in flight state, and cuts off the relationship between UAV and remote controller at a long distance. Through this jammer, the UAV can be forced to return or make forced landing to ensure the safety of the low-altitude airspace in the region.
III. Product Function
1. Cut off all contact between UAV and controller: UAV remote control failure.
2. Unmanned aerial vehicle ground control can not receive aerial photographs and videos;
3. UAV can't locate; jammer can force UAV to return or land.
IV. TECHNOLOGICAL PARAMETERS
Power supply mode:Built-in rechargeable lithium battery Lithium batteries can work continuously40 minutes
Operation mode: It can be operated with one or two hands, and it is portable and light.
Heat sink system: module: heat pipe radiator, environment: PWM temperature control fan
Host structure: high strengthABS Material
Interception modes: mandatory return, forced landing, image transmission interference
Interception Channel: Three Channels
※Opening mode: Three-band Independent Switch+ Start switch
Support band: GPSBeidou1.5G/Wi-Fi 2.4G/Remote Control 5.8G
Radio Frequency Power: GPSBeidou 1.5G:10W Wi-Fi 2.4G:10W Remote Control 5.8G:3W
_Antenna: Three-in-one Directional Antenna
Remote control:1200m
Working temperature: -10℃-+55℃
Storage temperature: -20℃-+60℃
※heavy Quantity: ≤2.5KG
_RF power: > 10w/10W/3w
Additional functions: Infrared aiming and night lighting