GPS/CDMA
Vehicle positioning terminalKS199C
Product Specification
Dear customers, thank you for your trust! We sincerely hope that this positioning product will bring you a perfect use experience!
Please read the instructions carefully before using them in order to get the correct installation method and fast operation. If the appearance and color of the product are changed, please refer to the actual object.
Catalog
I. Product Overview.................................................................................................................. P2
2. Product function............................................................................................................... P3
Third, the application field............................................................................................................... P3
Technical specifications..................................................................................................................... P4
5. Function settings......................................................................................................... P4
Installation instructions..................................................................................................................... P9
I. Product Overview:
KS199C is a highly modular positioning product based on CDMA (KS199C) network and GPS global positioning system. It locates and monitors remote targets through short message or Internet platform. It also has the functions of ACC detection, mileage statistics, oil cut-off and power cut, vibration detection, and informs owners of vehicle condition information through short message and platform. This product is a 9-80V wide voltage design, at the same time, it supports 9-100V voltage customization; supports Tianqin, Hongyuan Communications and JT808 and other protocols; supports Beidou dual-mode customization; supports special program customization; supports remote upgrade, is a powerful, stable performance, customizable professional positioning product.
2. Product function:
1. Location and tracking: through the platform or mobile phone to locate the terminal equipment from time to time, to understand the operation status of the equipment. The positioning platform is determined according to the customer's requirements.
2. Motion alarm: Send short messages to the device via mobile phone to start the motion alarm function. The vehicle equipped with terminal equipment will send short message notification when it moves.
3. Over-speed alarm: Send short messages to the device through the mobile phone, and start the over-speed alarm function. When the speed of a vehicle equipped with terminal equipment exceeds the set speed, a short message will be sent.
4. Electronic fence: Send short messages to the device through the mobile phone, and start the function of electronic fence. Vehicles equipped with terminal devices will send short message notifications when they exceed the limits.
5. The longitude dimension of mobile phone acquisition: the longitude dimension of the vehicle location where the equipment is installed can be obtained by mobile phone.
6. Remote restart system: restart terminal equipment by sending short messages from mobile phone.
7. Set the location interval: Set the interval of the data transmission platform through the mobile phone. The transmission interval can also be set through the platform, depending on whether the platform supports this function.
8. Mileage statistics, ACC detection function.
9. Modify IP and port functions.
10. Support GPRS and CDMA networks.
11. Support GPS/Beidou dual-mode positioning (customized).
12. This product supports customization of program functions.
III. Application Areas
1. Vehicle theft prevention and fleet management of automobiles, motorcycles, electric vehicles and all kinds of small cars;
2. Global satellite positioning, vehicle location query, real-time monitoring and timing tracking;
3. Command and Dispatch System of Vehicles in Various Industries.
Technical Specifications
Specifications |
||
84mNet weight |
communication network |
SCDMACDMA2000 1X 800Mhz |
Communication module |
Location module |
GPS-165dBm |
positioning accuracy |
rice |
|
SMS,GPRS(CMNET)/CDMA |
||
Mobile phones or platforms |
||
DC9VStandby current |
Storage temperature |
°C to +85°C |
-20Operating Humidity |
Less than span style=" font-size: 12.0pt; font-family:"" greater than 5%-95% RH |
Five.Terminal function settings:
Terminal devices have red, yellow and blue lights.
Red is the indicator lamp of the external power supply. The light indicates that the external power supply is normal and the extinction indicates that the external power supply is disconnected.
After power is supplied to the device, the yellow indicator of the terminal device will be on for more than ten seconds, and then it will flash every two seconds to indicate that the device is in working state.
The yellow indicator flashes quickly to indicate that the terminal device is communicating.
Blue indicator has not been on, indicating that the GPS module is working, but has not yet been set in place;
The blue indicator is always on, indicating that the GPS module is working and has been positioned.
After the equipment works properly, the following operations can be performed:
1. Add Administrator Number
By default, the device has no administrator status. At this time, the device is dialed by mobile phone. After the connection, the number is recorded by the device. In the no-administrator mode, the device can record up to four numbers, and the fifth number will automatically overwrite the first number.
Add Administrator Number as follows:
Add number 123456 18818585694
"Add Number" is the instruction, "123456" is the device password, "18818585694" is the number to be added.
Note: After adding the first administrator number, you must use the first administrator number to repeat the message above to add other administrator numbers to the device.
2. Delete Number
In the absence of an administrator, the device can record up to four numbers, and the fifth number will automatically overwrite the first number. In the presence of an administrator, use the administrator number to send the following message to the device deletion number.
Delete number 123456 18818585694
"Delete number" is the instruction, "123456" is the device password, "18818585694" is the number to be deleted. This instruction can only be operated by an administrator number. If the administrator deletes his own number, the device will return to the state of no administrator and automatically delete other numbers.
3. Change Password
Send the following text message to the device to change the password.
Modified password 123456 168168
"Modify password" is the instruction, "123456" is the old password of the device, and "168168168" is the new password of the device. The password must be six digits. The initial password of the device is 123456. In the administrator state, this instruction can only be operated by the administrator number. In the absence of an administrator, all numbers can be manipulated.
4. Motion Alarm
By sending the following text messages to the device, the motion alarm function is activated.
Motion Alarm
"Motion Alarm" is an instruction that does not require a password. After successful setting, the device will return a short message, the content is: "Setting the motion alarm successfully". When this function is activated, a text message will be sent to the mobile phone with this function when the vehicle is moving, indicating that the vehicle is already moving. "This function must be valid only when the GPS signal is available." Cancel the motion alarm function to send the following text messages to the device.
Cancel Motion Alarm
"Cancel Motion Alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.
5. Speed Alarm
By sending the following text messages to the device, the speeding alarm function is activated.
Overspeed alarm 80
"Overspeed alarm" is an instruction and "80" is a speed limit of 80 km/h. This instruction does not require a password. After successful setup, the device will return a short message, which reads: "Set the alarm successfully for speeding". When this function is activated, when the speed of the vehicle exceeds the set speed, a short message will be sent to the mobile phone with this function, indicating that the vehicle has exceeded the speed limit. "This function must be valid only when the GPS signal is available." Cancel the overspeed alarm function to send the following text messages to the device.
Cancel overspeed alarm
"Cancel overspeed alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.
6. The dimension of mobile phone acquisition
The current longitude dimension of the vehicle installed with the device can be obtained by mobile phone. Send the following text message to the device.
Mobile Location
"Mobile Location" is an instruction that does not require a password. Whether the device is in an administrator state or in an administrator-free state, any number can send this instruction.
7. Setting Equipment Number
Setting platform number, using and binding platform, according to the specific platform to be effective. Set the method to send the following content to the device.
Equipment number 18818585694
"Equipment Number" is the instruction, and "18818585694" is the 11-digit mobile phone number, which must be 11-digit.
8. reboot system now
Send the following content to the terminal device number through the mobile phone, and the terminal device will be restarted.
Restart System 123456
"Restart the system" is the instruction and "123456" is the password. After restarting the system, the equipment will return to the state of oil supply and power supply.
9. Set the transfer interval
Set the interval between the data returned by the terminal device and the platform through the mobile phone. Send the following to the terminal device number.
Location interval 30 times 5
"Location interval" is the instruction, and "30" is the interval between data transmission to the platform, which means that data transmission to the platform once in 30 seconds must be less than 256 minutes. "Number" is an instruction and "5" is a transmission number, indicating that the transmission will stop after five transfers. Must be less than 256 times. Number of times "*" or "0" means infinite number of transfers. For example, "Location interval of 30 times *" means that data is transmitted to the platform every 30 seconds and continuously. To cancel the transfer, you can send the following to the device number.
Cancellation of positioning
The device will stop transmitting data to the platform. This function can also be implemented through the platform, depending on whether the specific platform supports this function.
10. Restore the initial password
When the password of the device is forgotten, a short message can be sent to restore the device to its original password. Send the following text message to the device number.
Restore the initial password
"Restore the initial password" is the instruction. In the absence of an administrator, all numbers can operate secondary functions. In the absence of an administrator, only an administrator can operate this function. The initial password of the device is 123456.
11. Modify IP address and port
The IP address and port of the device terminal can be modified so that the device can transmit data to another platform. Send the following text message to the terminal number.
Address 123.67.87.9 Port 344
"Address" is the instruction, "123.67.87.9" is the IP address, "port" is the instruction, "344" is the port number.
12.Circuit Control
The circuit of the vehicle installed with the equipment can be controlled by short message. To disconnect the vehicle circuit, send the following short message to the device.
Blackout 123456
"Power off" is the instruction and "123456" is the password. To close the circuit, send the following text message to the device.
Power supply 123456
"Fuel supply" is the instruction and "123456" is the password. In the state of administrator, only the number set can be operated, and in the state of no administrator, all numbers can be operated.
Installation instructions:
1. Installation method:
The equipment has simple wiring and convenient installation. There are four external wiring. The red wire is the positive power supply for the equipment, the black wire is the negative power supply for the equipment, the orange wire is the ACC line, and the yellow wire is the oil-cut power output line. When installing, please remove the shell and load the standard SIM card into the equipment. As shown in the following figure, then connect the three wires of the equipment, red, black and orange, to the automobile power supply and ACC. (Note: The yellow line decides whether to connect or not according to the need. When installing the equipment, the lamp should be placed upward on one side, and no metal objects should be covered on the front of the equipment.)
2. Matters needing attention:
1) Read this manual carefully before installing the equipment.
2) Insert SIM card before installation. SIM card is a GPRS network traffic card (CMNET, not CMWAP traffic) or a branch supporting location function.
3) The working voltage of this equipment is 9V-80V. Please use it in the range of working voltage.
4) Please confirm that all the equipment and connection lines are connected correctly before connecting to the mainframe power supply. Do not install or disassemble equipment when the host is powered on. If missing wires or misconnection are found, please cut off the power supply first, otherwise the equipment will be damaged easily.
5) This equipment is a wireless communication equipment. Please cut off the power supply of the main engine before entering the oil depot and dangerous goods place.
6) In order to avoid EMI or incompatibility of configuration, stop using the equipment in places where prohibition notice is posted.
7) Please keep the equipment in a dry environment. The humid environment can easily damage the internal circuit.
8) Please clean it with dry cloth and do not use chemicals or detergents.