Home>Product list>communication device>Chewushi Electric Motorcycle GPS Locator
细节展示放大镜特效

Chewushi Electric Motorcycle GPS Locator

  • No:ks199
  • Quantity:

    2.jpg

    GSM/GPRS/GPS

    Vehicle positioning terminal KS365

    Product Specification

    (Version V1.0)


    Please read the product specifications (including installation instructions) carefully before use in order to get the correct installation method and fast operation. If the appearance and color of the product are changed, please refer to the actual object.


    Catalog


    First, product summary................................................................................................................................................ P2

    2. Product function................................................................................................................................................ P2

    Third, the application field..................................................................................................................... P3

    4. Technical specifications..................................................................................................................... P4

    5. Function settings............................................................................................................ P4

    Installation instructions................................................................................................................................. P9




    1. Product review:

    KS365 is a special vehicle positioner for anti-theft service of Xuntuo Kesheng Vehicle Wushi 365. This product is based on GSM/GPRS network and GPS (Global Satellite Positioning System). It locates or monitors remote targets through short message or Internet platform. It also has the functions of mileage statistics, ACC detection, power off alarm, compatible with the original car anti-theft device (i.e., after the car anti-theft device alarms, it also alarms, through the Internet platform). Short message notification car owner) and other functions. The device is precise in positioning and easy to install (ACC automatic identification), which is a professional positioning equipment with strong practicability.



    2. Product function:

    1. Location and tracking: Real-time positioning of vehicles equipped with the product through platforms or mobile phones to understand the running status of vehicles. The positioning platform used is determined according to customer requirements.

    2. Motion alarm: Users can send short messages to the device by mobile phone to start the motion alarm function. When the vehicle installed with the product moves, it will send short message notification to the user.

    3. Over-speed alarm: Send short messages to the device through the mobile phone, and start the over-speed alarm function. When the speed of a vehicle equipped with terminal equipment exceeds the set speed, a short message notification will be sent to the user.

    4. Electronic fence: Send short messages to the device through the mobile phone, and start the function of electronic fence. When a vehicle equipped with terminal equipment exceeds the limit, it will send short message notification to the user.

    5. The longitude dimension of mobile phone acquisition: the longitude dimension of the vehicle location where the equipment is installed can be obtained by mobile phone.

    6. Remote restart system: the device can be restarted by sending short messages through mobile phones.

    7. Set the location interval: Set the time interval (i.e. frequency) of the data transmission platform through the short message of mobile phone. The transmission time interval can also be set through the platform, depending on whether the platform supports this function.

    8. Mileage statistics, ACC detection function, power failure alarm and other functions.

    9. Modify IP and port functions.

    10. The vehicle ignition can be intelligently identified according to the battery voltage of the vehicle.



    III. Application Areas:

    1. Private car positioning anti-theft;

    2. Car rental management;

    3. Small fleet management;

    4. Global satellite positioning, vehicle location query, real-time monitoring and timing tracking;

    5. Command and Dispatch System of Vehicles in Various Industries.


    Technical specifications:

    project

    Specifications

    networkfrequency

    GSM:850/900M/1800M/1900M

    Location sensitivity

    Nominal-104dBm

    GSM/GPRS Module

    SIMCOM SIM800C

    LocationModular

    GT-1612 / Beidou

    Appearancesize

    72* 52 * 21 (mm)

    working temperature

    -20°C to +70°C

    Storage temperature

    -40°C to +85°C

    Location query mode

    Mobile phones or platforms

    working voltage

    DC 9V-36V

    Spare battery

    3.7V / 400mAh

    Standby Current

    Less than 30 mA



    5. Function setting:

    A. Setting up Administrators

    There are two modes of operation for devices, one is administrator mode, the other is no administrator mode. In the administrator mode, only the set number can operate the device. In no administrator mode, all numbers can operate on the device. The device defaults to "no administrator status".

    The way to set the device as an administrator is to send the following short message to the device:

    Administrator 123456

    The number that sends a short message becomes the administrator number. "Administrator" is the instruction, "123456" is the device password. The device changes from an administrator state to an administrator-free state by deleting the administrator number with the administrator's mobile phone.


    B. Add Number

    In the absence of an administrator, the device is dialed with a mobile phone, and the number is recorded by the device after it is connected. In the no-administrator mode, the device can record up to four numbers, and the fifth number will automatically overwrite the first number.

    In the presence of an administrator, use the administrator number to send the following short message to the device to add other numbers.

    Add number 123456 18818585694

    "Add Number" is the instruction, "123456" is the device password, "18818585694" is the number to be added. This instruction can only be operated by an administrator number.


    C. Delete Number

    In the absence of an administrator, the device can record up to four numbers, and the fifth number will automatically overwrite the first number.

    In the presence of an administrator, use the administrator number to send the following message to the device deletion number.

    Delete number 123456 18818585694

    "Delete number" is the instruction, "123456" is the device password, "18818585694" is the number to be deleted. This instruction can only be operated by an administrator number. If the administrator deletes his own number, the device will return to the state of no administrator and automatically delete other numbers.


    D. Modifying passwords

    Send the following text message to the device to change the password.

    Modified password 123456 168168

    "Modify password" is the instruction, "123456" is the old password of the device, and "168168168" is the new password of the device. The password must be six digits. The initial password of the device is 123456. In the administrator state, this instruction can only be operated by the administrator number. In the absence of an administrator, all numbers can be manipulated.


    E. Motion Alarm

    By sending the following text messages to the device, the motion alarm function is activated.

    Motion Alarm

    "Motion Alarm" is an instruction that does not require a password. After successful setting, the device will return a short message, the content is: "Setting the motion alarm successfully". When this function is activated, a text message will be sent to the mobile phone with this function when the vehicle is moving, indicating that the vehicle is already moving. "This function must be valid only when the GPS signal is available." Cancel the motion alarm function to send the following text messages to the device.

    Cancel Motion Alarm

    "Cancel Motion Alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.


    F. Overspeed Alarm

    By sending the following text messages to the device, the speeding alarm function is activated.

    Overspeed alarm 80

    "Overspeed alarm" is an instruction and "80" is a speed limit of 80 km/h. This instruction does not require a password. After successful setup, the device will return a short message, which reads: "Set the alarm successfully for speeding". When this function is activated, when the speed of the vehicle exceeds the set speed, a short message will be sent to the mobile phone with this function, indicating that the vehicle has exceeded the speed limit. "This function must be valid only when the GPS signal is available." Cancel the overspeed alarm function to send the following text messages to the device.

    Cancel overspeed alarm

    "Cancel overspeed alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.


    G. The dimension of mobile phone acquisition

    The current longitude dimension of the vehicle installed with the device can be obtained by mobile phone. Send the following text message to the device.

    Mobile Location

    "Mobile Location" is an instruction that does not require a password. Whether the device is in an administrator state or in an administrator-free state, any number can send this instruction.


    H. Setting Equipment Number

    Setting platform number, using and binding platform, according to the specific platform to be effective. Set the method to send the following content to the device.

    Equipment number 18818585694

    "Equipment Number" is the instruction, and "18818585694" is the 11-digit mobile phone number, which must be 11-digit.


    I. Restart System

    Send the following content to the terminal device number through the mobile phone, and the terminal device will be restarted.

    Restart System 123456

    "Restart the system" is the instruction and "123456" is the password. After restarting the system, the equipment will return to the state of oil supply and power supply.


    J. Setting Transport Interval

    Set the interval between the data returned by the terminal device and the platform through the mobile phone. Send the following to the terminal device number.

    Location time 3 times 5

    "Location time" is the instruction, and "3" is the interval between data transmission to the platform, which means that data transmission to the platform once in 3 minutes must be less than 256 minutes. "Number" is an instruction and "5" is a transmission number, indicating that the transmission will stop after five transfers. Must be less than 256 times. Number of times "*" means an infinite number of transfers. For example, "Location time 1 times *" means that data is transmitted to the platform every minute and continuously. To cancel the transfer, you can send the following to the device number.

    Cancellation of positioning

    The device will stop transmitting data to the platform. Secondary functions can also be implemented through the platform, depending on whether the specific platform supports this function.


    K. Restore the initial password

    When the password of the device is forgotten, a short message can be sent to restore the device to its original password. Send the following text message to the device number.

    Restore the initial password

    "Restore the initial password" is the instruction. In the absence of an administrator, all numbers can operate secondary functions. In the absence of an administrator, only an administrator can operate this function. The initial password of the device is 123456.


    L. Modifying IP Address and Port

    The IP address and port of the device terminal can be modified so that the device can transmit data to another platform. Send the following text message to the terminal number.

    Address 123.67.87.9 Port 344

    "Address" is the instruction, "123.67.87.9" is the IP address, "port" is the instruction, "344" is the port number.


    M. Modifying Intelligent Ignition Voltage

    Ignition 132

    "Ignition" is the instruction, 132 is the battery voltage value after ignition of the set vehicle, the unit is 0.1V, 132 represents 13.2V.



    Installation instructions:

    1. Installation steps: (The equipment is easy to install and easy to connect):

    1) Placement equipment. Generally speaking, we will put the equipment in the cab box behind the dashboard, or in the front box of the co-driver, but the specific location should be determined according to the type of vehicle and the actual situation, users can adopt the advice of professional installation service personnel.

    2) Put the standard SIM card on the fittings card set and insert it into the slot of the locator.

    3) Connect the red power cord of the positioner to the positive pole of the vehicle-mounted 12V DC battery.

    4) Connect the black ground wire of the positioner to the negative pole of the vehicle battery.

    5) Finish the wires, restore the parts and install them.



    2. Indicators:

    Terminal devices have red and blue lights.

    After the power is supplied to the device, the red light of the terminal device will be on for more than ten seconds, and then flashes every two seconds to indicate that the device is in working state.

    The red light flashes quickly, indicating that the terminal device is communicating.

    The blue indicator flashes every two seconds, indicating that the GPS module is on standby.

    Blue indicator has not been on, indicating that the GPS module is working, but has not been positioned;

    Blue light is always on, indicating the GPS module



    3. Notes:

    1) Please read the instructions carefully before installing the equipment.

    2) Installation of equipment must be carried out without live equipment, otherwise there will be danger. Please confirm that all the equipment and connection lines are connected correctly before connecting to the mainframe power supply. Do not install or disassemble the main engine when it is energized. If missing wires or misconnection are found, please cut off the power supply first, otherwise the equipment will be damaged easily.

    3) Installation of equipment shall be undertaken by professional maintenance technicians at designated service points of Chewushi 365. Without the permission of our company, users are not allowed to disassemble or repair at will, otherwise the consequences are at their own expense.

    4) Before installation, please insert SIM card, "Make sure SIM card does not have a password set", otherwise the device will not work properly.

    5) The working voltage of this equipment is 10V-36V. Please use it in the range of working voltage.

    6) This equipment is a wireless communication equipment. Before entering the oil depot and other dangerous goods sites, please cut off the main power supply.

    7) The host of your GPS vehicle terminal is a low-power wireless transmitter and receiver. In use, it will receive and send radio frequency signals. In order to avoid EMI or incompatible configuration, please stop using such equipment in places where notice of prohibition is posted.