Home>Product list>communication device>Chewushi Beidou GPS satellite positioning anti-theft device
细节展示放大镜特效

Chewushi Beidou GPS satellite positioning anti-theft device

  • No:ks166
  • Quantity:

    GPS/GSM/GPRS

    Vehicle positioning terminal KS166

    Product Specification



    Dear customers, thank you for your trust! We sincerely hope that this positioning product will bring you a perfect use experience!

    Please read the instructions carefully before using them in order to get the correct installation method and fast operation. If the appearance and color of the product are changed, please refer to the actual object.



    Catalog


    I. Product Overview.................................................................................................................. P2

    2. Product function..................................................................................................................... P2

    Third, the application field............................................................................................................... P3

    Technical specifications..................................................................................................................... P3

    5. Function settings......................................................................................................... P4

    Installation instructions..................................................................................................................... P9



    I. Product Overview:

    This product is based on GSM/GPRS network and GPS global satellite positioning system. It is a highly modular product. It locates or monitors remote targets through short message or Internet platform. It also has the functions of intelligent ACC detection, mileage statistics, power off alarm, and can inform owners of vehicle condition information through short message and platform.



    2. Product function:

    1. Location and tracking: real-time positioning of the terminal device through the platform or mobile phone to understand the operation status of the device. The positioning platform is determined according to the customer's requirements.

    2. Motion alarm: Send short messages to the device by mobile phone, and start the motion alarm function. The vehicle equipped with the terminal device will send short message notification when it moves.

    3. Over-speed alarm: Send short messages to the device through the mobile phone, and start the over-speed alarm function. When the speed of the vehicle equipped with the terminal exceeds the set speed, a short message will be sent.

    4. Electronic fence: Send short messages to the device through the mobile phone, and start the function of electronic fence. Vehicles equipped with this terminal device will send short message notification when they exceed the limit.

    5. The longitude dimension of mobile phone acquisition: the longitude dimension of the location of the vehicle installed with the device can be obtained by mobile phone.

    6. Remote Restart System: Reboot the terminal device by sending short messages from the mobile phone.

    7. Set the location interval: Set the interval of the data transmission platform through the mobile phone. The transmission interval can also be set through the platform, depending on whether the platform supports this function.

    8. Mileage statistics, ACC detection function, power off alarm function.

    9. Modify IP and port functions.

    10. Intelligently identify whether the vehicle ignites or not according to the battery voltage of the vehicle.

    11. This product supports customization.


    III. Application Areas

    1. Car, motorcycle and electric vehicle rental/small fleet management;

    2. Global satellite positioning, vehicle location query, real-time monitoring and timing tracking;

    3. Command and Dispatch System of Vehicles in Various Industries.



    Technical Specifications

    project

    Specifications

    Appearancesize

    53mm *47mm *15mm

    productNet weight

    0.1KG

    communicationnetwork

    GSM/GPRS/GPS

    Network Frequency Band

    850/900/1800/1900Mhz

    Locationchip

    MTK chip

    GPS module

    Simcom800C

    GPS Sensitivity

    -159dBm

    GPS positioning accuracy

    5 meters

    Data transmission mode

    SMS,GPRS(CMNET)

    Location query mode

    Mobile phones or platforms

    working voltage

    DC9V—80V

    Standby current

    Less than 30 mA

    Storage temperature

    -40°C to +85°C

    working temperature

    -20°C to +70°C

    Operating Humidity

    5%--95%RH



    Fifth, terminal function settings:

    Terminal devices have red and blue lights.

    After the power is supplied to the device, the red light of the terminal device will be on for more than ten seconds, and then flashes every two seconds to indicate that the device is in working state.

    The red light flashes quickly to indicate that the terminal device is communicating.

    The blue indicator flashes for two seconds to indicate that the GPS module is on standby.

    Blue indicator has not been on, indicating that the GPS module is working, but has not yet been set in place;

    The blue indicator is always on, indicating that the GPS module is working and has been positioned.

    After the equipment works properly, the following operations can be performed:


    A. Setting up Administrators

    There are two modes of operation for devices, one is administrator mode, the other is no administrator mode. In the administrator mode, only the set number can operate the device. In no administrator mode, all numbers can operate on the device. The device defaults to "no administrator status". The way to set the device as an administrator is to send the following short message to the device:

    Administrator 123456

    The number that sends a short message becomes the administrator number. "Administrator" is the instruction, "123456" is the device password. The device changes from an administrator state to an administrator-free state by deleting the administrator number with the administrator's mobile phone.


    B. Add Number

    In the absence of an administrator, the device is dialed with a mobile phone, and the number is recorded by the device after it is connected. In the no-administrator mode, the device can record up to four numbers, and the fifth number will automatically overwrite the first number. In the presence of an administrator, use the administrator number to send the following short message to the device to add other numbers.

    Add number 123456 18818585694

    "Add Number" is the instruction, "123456" is the device password, "18818585694" is the number to be added. This instruction can only be operated by an administrator number.


    C. Delete Number

    In the absence of an administrator, the device can record up to four numbers, and the fifth number will automatically overwrite the first number. In the presence of an administrator, use the administrator number to send the following message to the device deletion number.

    Delete number 123456 18818585694

    "Delete number" is the instruction, "123456" is the device password, "18818585694" is the number to be deleted. This instruction can only be operated by an administrator number. If the administrator deletes his own number, the device will return to the state of no administrator and automatically delete other numbers.


    D. Modifying passwords

    Send the following text message to the device to change the password.

    Modified password 123456 168168

    "Modify password" is the instruction, "123456" is the old password of the device, and "168168168" is the new password of the device. The password must be six digits. The initial password of the device is 123456. In the administrator state, this instruction can only be operated by the administrator number. In the absence of an administrator, all numbers can be manipulated.


    E. Motion Alarm

    By sending the following text messages to the device, the motion alarm function is activated.

    Motion Alarm

    "Motion Alarm" is an instruction that does not require a password. After successful setting, the device will return a short message, the content is: "Setting the motion alarm successfully". When this function is activated, a text message will be sent to the mobile phone with this function when the vehicle is moving, indicating that the vehicle is already moving. "This function must be valid only when the GPS signal is available." Cancel the motion alarm function to send the following text messages to the device.

    Cancel Motion Alarm

    "Cancel Motion Alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.


    F. Overspeed Alarm

    By sending the following text messages to the device, the speeding alarm function is activated.

    Overspeed alarm 80

    "Overspeed alarm" is an instruction and "80" is a speed limit of 80 km/h. This instruction does not require a password. After successful setup, the device will return a short message, which reads: "Set the alarm successfully for speeding". When this function is activated, when the speed of the vehicle exceeds the set speed, a short message will be sent to the mobile phone with this function, indicating that the vehicle has exceeded the speed limit. "This function must be valid only when the GPS signal is available." Cancel the overspeed alarm function to send the following text messages to the device.

    Cancel overspeed alarm

    "Cancel overspeed alarm" is an instruction that does not require a password. In the administrator state, only the set number can operate this function. In the absence of an administrator, all numbers can operate this function.


    G. The dimension of mobile phone acquisition

    The current longitude dimension of the vehicle installed with the device can be obtained by mobile phone. Send the following text message to the device.

    Mobile Location

    "Mobile Location" is an instruction that does not require a password. Whether the device is in an administrator state or in an administrator-free state, any number can send this instruction.


    H. Setting Equipment Number

    Setting platform number, using and binding platform, according to the specific platform to be effective. Set the method to send the following content to the device.

    Equipment number 18818585694

    "Equipment Number" is the instruction, and "18818585694" is the 11-digit mobile phone number, which must be 11-digit.


    I. Restart System

    Send the following content to the terminal device number through the mobile phone, and the terminal device will be restarted.

    Restart System 123456

    "Restart the system" is the instruction and "123456" is the password. After restarting the system, the equipment will return to the state of oil supply and power supply.


    J. Setting the transmission interval

    Set the interval between the data returned by the terminal device and the platform through the mobile phone. Send the following to the terminal device number.

    Location time 3 times 5

    "Location time" is the instruction, and "3" is the interval between data transmission to the platform, which means that data transmission to the platform once in 3 minutes must be less than 256 minutes. "Number" is an instruction and "5" is a transmission number, indicating that the transmission will stop after five transfers. Must be less than 256 times. Number of times "*" means an infinite number of transfers. For example, "Location time 1 times *" means that data is transmitted to the platform every minute and continuously. To cancel the transfer, you can send the following to the device number.

    Cancellation of positioning

    The device will stop transmitting data to the platform. Secondary functions can also be implemented through the platform, depending on whether the specific platform supports this function.


    K. Restore the initial password

    When the password of the device is forgotten, a short message can be sent to restore the device to its original password. Send the following text message to the device number.

    Restore the initial password

    "Restore the initial password" is the instruction. In the absence of an administrator, all numbers can operate secondary functions. In the absence of an administrator, only an administrator can operate this function. The initial password of the device is 123456.


    L. Modifying IP Address and Port

    The IP address and port of the device terminal can be modified so that the device can transmit data to another platform. Send the following text message to the terminal number.

    Address 123.67.87.9 Port 344

    "Address" is the instruction, "123.67.87.9" is the IP address, "port" is the instruction, "344" is the port number.


    M. Modifying Intelligent Ignition Voltage

    Ignition 132

    "Ignition" is the instruction, 132 is the battery voltage value after ignition of the set vehicle, the unit is 0.1V, 132 represents 13.2V.



    Installation instructions:

    1. Installation method:

    The equipment has simple wiring and convenient installation. There are two external wiring, the red wire is positive for the equipment power supply, and the black wire is negative for the equipment power supply. When installing, please take off the shell first, load the standard MINI SIM card (small card) into the equipment, and then connect the red and black two wires of the equipment to the automobile power supply. (Note: When installing the equipment, one side of the lamp should be placed upward, and no metal objects should be covered on the front of the equipment.)

    When installing MIMIMI SIM card, please pay attention to installing in the direction shown below, and pay attention to the direction of the gap of MIMIMI SIM card.

    2. Notes:

    1) Read this manual carefully before installing the equipment.

    2) Before installation, please insert SIM card. SIM card is a GPRS network traffic card supporting positioning function (opening CMNET, not CMWAP traffic), and ensure that SIM card opens caller display. If the incoming call is not switched on, the incoming call is not switched on.

    3) The working voltage of this equipment is 9V-80V. Please use it in the range of working voltage.

    4) Please confirm that all the equipment and connection lines are connected correctly before connecting to the mainframe power supply. Do not install or disassemble equipment when the host is powered on. If missing wires or misconnection are found, please cut off the power supply first, otherwise the equipment will be damaged easily.

    5) This equipment is a wireless communication equipment. Please cut off the power supply of the main engine before entering the oil depot and dangerous goods place.

    6) In order to avoid EMI or incompatibility of configuration, stop using the equipment in places where prohibition notice is posted.

    7) Please keep the equipment in a dry environment. The humid environment can easily damage the internal circuit.

    8) Please clean it with dry cloth and do not use chemicals or detergents.